Setting Oven Controls
Setting the Clock
Changing between 12 or 24 hour display
Setting the Clock
The CLOCK _Q} pad is used to set the clock. The clock may be set for 12 or 24 hour time of |
| |
day operation. The clock has been preset at the factory for the 12 hour operation. When the |
| |
range is first plugged in, or when the power supply to the range has been interrupted, the timer |
| |
in the display will flash the time of day (Fig. | 1). | Fig. 1 |
INSTRUCTIONS | PRESS | DISPLAY |
To set the clock (example below for 1:30):
1.Press @. "CLO" will appear in the display (Fig. 2).
2 PressQ @ @ padstosetthe meofdayto1:30/F3/g
"CLO" will appear in the display. Press _. | "CLO" will |
disappear and the clock will start (Fig. 4).
@
®@@
<@
Fig. 2
Fig. 3
Changing between 12 or 24 hour time of day display:
1. Press and hold _Q} for 6 seconds (Fig. 3). While holding the | for 6 seconds |
pad down the current time of day will remain and "CLO" will disappear from the display (Fig. 4). CONTINUE holding the pad until a beep is heard.
2.The display will show either "12h"(Fig. 5) or "24h"(Fig. 6).
3.Press c....0,.to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Fig. 5) or "24h" (Fig. 6).
4. Press _ | to accept the desired change or press @ to |
reject the change.
5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from O:00 through 23:59 hours.
Fig. 4
Fig. 6
Using the Air Guard TM feature
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking process. This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.
if you wish to have Air Guard TM clean the oven exhaust once cooking has started, press the @ key.
Note: The Air Guard TM indicator light will glow anytime the Air Guard TM is active. Air Guard will turn on and cannot be manually turned off during the
13
