Setting Oven Controls

Setting Convection Roast

Setting Convection Roast

The CONY ROAST ,_;';;,pad is designed to give optimum cooking performance for this feature. The Convection Roast pad

combines a cook cycle with the convection fan and element to roast meats and poultry. Preheating is not necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in juices and flavors. Foods are crispy brown on the outside while staying moist on the inside.

INSTRUCTIONSPRESS

DISPLAY

To set the Convection Roast feature (example for Meats to cook at 350°F):

1.Arrange interior oven racks and place food in oven.

2. Press _% . "CONV" will flash and "===°"will be displayed (See

Fig. 1).

3.Press _'_. "CONV" and "350 °" will appear in the display

V

(See Fig. 2). The convection fan icon will come on.

Press _ to stop Convection Roast at any time.

Roasting Rack instructions

f_

Reast

Fig. 1

Fig. 2

iii...........

When preparing meats for convection roasting, use the broiler pan and insert along with the roasting rack. The broiler pan will catch grease spills and the insert will help prevent grease splatters. The roasting rack will allow the heat to circulate around the meat.

To prevent food from contacting the broil element and to prevent grease splattering, DO NOT use the roasting rack when broiling.

1.Place oven rack on bottom or next to the bottom rack position. See Arranging Oven Racks in the Before Setting Oven Controls section.

2.Place the insert in the broiler pan. The roasting rack fits on the insert allowing the heated air to circulate under the food for even cooking and helps to increase browning on the underside. Make sure the roasting rack is securely seated on the insert in the broiler pan. DO NOT use the broiler pan without the insert. DO NOT cover the insert with aluminum foil.

3.Position food (fat side up) on the roasting rack (See Fig. 3).

4.Place the broiler pan on the oven rack.

Fig. 3

23

Page 23
Image 23
Kenmore 790.9446 manual Setting Convection Roast, Roasting Rack instructions