You can upload 7 reminders, each including time and name, to your wrist receiver from Polar Precision Performance software.
The reminder sounds an alarm only when time of day is displayed. When the reminder alarm comes on, it will sound for 15 seconds. You can turn it off by pressing any of the buttons except the signal/light button.
Erase the reminder text by pressing any of the buttons except the signal/light button.
To continue your settings, press the stop button or to return to the Time of Day display, press and hold the stop button.
C. EXERCISE
Setting Tips
Swap Time 1 or Time 2
In the Time of Day display press and hold the down button. Time 1 or
Time 2 is displayed in the uppermost row for a couple of seconds. Displayed time will now be used in all watch and alarm functions. If you chose time 2, “2” is displayed in the Time of Day display.
Shortcut to Watch Setting Loop
Press and hold the signal/light button for a few seconds to enter into the watch setting loop. If you want to skip some parts and go directly to a watch function, scroll up or down button until the desired watch function is
Time of Day
Heart rate measure mode
Exercise recording mode
You can use two modes while exercising: Measure or Exercise mode. In the Measure mode you can see your heart rate but exercise information will not be recorded. In the Exercise mode your exercise is recorded. Stopwatch and other calculations are also started.
displayed. Set the function as in the “Watch settings” section.
Swap Measuring Units
As you set your user information for weight and height, press and hold the signal/light button until the units are swapped. Release the button.
Swap Date, User ID Number, User Name and Logo
You are able to set a user ID number, user name and logo with the Polar Precision Performance software. These settings are shown on the upper row of the Time of Day display. You can swap between the user ID, user name, logo and date by pressing and holding the up button.
B 38
Heart Rate Measure Mode
1.Wear the transmitter and the wrist receiver as described in “Easy start” section.
2.To ensure that the code search will find a signal:
•Keep the wrist receiver within 3 feet/ 1 meter of your transmitter.
•Check that you are not near: people with heart rate monitors, high voltage power lines, televisions, mobile phones, cars, motor driven exercise equipment or other electromagnetic disturbance.
C 39
S810i manual USA GBR A.pm6 |
29.7.2002, 14:14
