Brinkmann S810I Connection to Computer, Downloading Training Data to Computer, Deleting a File

1.Press OK to start updating the desired total count. Reset appears and the value starts to flash.

2.Press and hold the down button. Reset starts to flash. You can still cancel the previous setting by releasing the down button before the value is updated. If you are sure that you want to update the value keep holding the down button until value is updated. Release.

3.Press the stop button to exit the reset display. Press and hold the stop button to return to the Time of Day display.

Deleting a File

1.In the Time of Day display scroll up or down until FILE is displayed.

2.Press OK to enter the File mode.

3.Scroll up or down until desired exercise file is displayed. Press and hold the signal/light button. DELETE FILE and file number are displayed.

4.Press OK. The receiver confirms if you want to delete a file (Are you sure).

5.Press OK to delete the selected file.

6.Press stop to exit the file. Wait appears. The receiver reorganizes your file, which takes few seconds.

7.Press stop to return to the Time of Day display.

Deleting All Files

1.In the Time of Day display scroll up or down until FILE is displayed.

2.Press and hold the signal/light button. DELETE FILES is displayed.

3.Press OK. The receiver confirms if you want to delete all files (Are you sure).

4.Press OK to delete all exercise files.

5.Press stop to return to the Time of Day display.

D 60

E. CONNECTION TO

COMPUTER

There is two-way communication between Polar and a computer. The Polar Precision Performance software offers an easy way to analyze training data. A training log makes it possible to plan future training. Wrist receiver settings can be uploaded from the software or manually entered. After preparing your settings you can upload options lock to ensure that your settings will not change. You must deactivate the options lock from the “user features” of your software.

Downloading Training Data to Computer

For IR communication you need an IrDA port and Windows® 98 operating system or later in your computer.

If you do not have an IrDA port in your computer you need one of the following:

A)an optional Polar IR Interface for RS-232 port and Windows® 95 operating system or later in your computer or

D 61

S810i manual USA GBR A.pm6 60-61

29.7.2002, 14:15