1.Press the RESET button with a pen tip. Display becomes full of digits. If you don’t press any button after reset within one minute the wrist receiver goes to the Time of Day display.
2.Press any of the buttons once. The time of day is displayed.
...the battery of the wrist receiver must be replaced?
We recommend having all service done by an authorized Polar Service Center. This is especially necessary to ensure the guarantee remains valid and is not affected by incorrect repair procedures done by an unauthorized agent. Polar Service will test your wrist receiver for water resistance after battery replacement and make a full periodic check of the complete Polar heart rate monitor.
...the data transfer from receiver to computer was unsuccessful
1.Check the correct position of the wristwatch receiver with the infrared window of the computer or the optional Polar IR Interface.
2.Check that the surroundings are not too bright. This problem often occurs near windows.
3.Check that there is no obstruction between the infrared windows.
I 82
J.TECHNICAL
SPECIFICATIONS
Polar heart rate monitor is designed to indicate the level of physiological strain and intensity in sports and exercise. No other use is intended or implied. Heart rate is displayed as number of heart beats per minute (bpm).
Transmitter |
|
Battery type: | |
Battery life: | Average 2500 hours of use |
Operating temperature: | 14 ° F to 122 ° F/ |
Material: | Polyurethane |
Waterproof |
|
Elastic Strap |
|
Buckle material: | Polyurethane |
Fabric material: | Nylon, polyester and natural rubber |
| including a small amount of latex |
J 83
S810i manual USA GBR A.pm6 |
29.7.2002, 14:15
