BATTERY REPLACEMENT
1_ Squeeze tab of battery covert
2_ At the same time pull cover out of remote°
3.insert battery as shown.
4.Close the battery cover_
O
O
CRADLE: The remote control has a separate walt.mountable storage cradle that can
be conveniently attached to any wall using a screw,
BATTERY USE
oInsert 3V lithium battery CR2025 into the remote control
°Incorrect battery usage may cause battery fluid leakage andlor damage.
°When not using remote control for an ex- tended period, remove the battery.
°Avoid dropping or damaging the remote control° Keep remote control away from direct sunlight or heaters.
PROPER OPERATING CONDITIONS
•Operate the remote control facing the air cleaner.
•Operate within 20 feel of the air cleaner.
IMPROPER OPERATING CONDITIONS
°Any location where there is inverter light- ing equipment or electronic spontaneous
lighting equipmenL
•When objects or furniture are located between the remote and the air cleaner,
•When air cleaner unit is located in direct
sunlight, as sunlight may interfere with the infrared sensor.
°in areas where fluorescent lighting is flickering due to
At POWER: Use the power button to turn the power on and off° A short "beep" will sound when the unlt turns on or off.
B_ AUTO: When in AUTO mode, the air cleaner will automatically sense the amount of impurities in the air and adjust the fan speed accordingly. When the unit is first turned on it wilt default to
AUTO mode.
C_ FAN SPEED
o UP: Use this button to switch from automatic operation and increase the fan speed.
•DOWN: Use this button to switch from
automatic operation and decrease the
fan speed.
Dr TURBO: Use this button to switch from
automatic operation and begin the maximum amount of room air cleaning and air movement.
12
