B5150
85300185450
A, AIR QUALITY SENSOR: Automatically monitors the air quality level and adjusts fan speed accordingly+
B. CHECK FILTER INDICATOR: The indi-
cator will signal when to replace the True HEPA Filter,
C. RESET FILTER: Resets the CHECK FILTER indicator light.
D. AUTO: Changes the fan speed to AUTO.
E. PLASMA INDICATOR: Displays the PLASMA activity. (See page 2 for PtasmaWave TM Technology)
AUTOMATIC OPERATION: When in AUTO mode, the air cleaner will automati + cally sense the amount of impurities in the air and adjust the fan speed accordingly_
When the unit is first turned on it will default to AUTO mode°
MANUAL OPERATION (Adjusting the fan speed): Once the unit is on, switch to manual operation by pressing the UP &
DOWN arrow buttons on the remote control or the FAN SPEED button_ Once in manual operation, the fan speed will not aulomati- calty adjust to the air quality or light level.
R AIR QUALITY LEVEL INDICATOR:
Displays the current quality of the air.
G. FAN SPEED INDICATOR:
Displays current fan speed setting.
H, FAN SPEED: Once the machine is on and in AUTO mode, switch to manual
operation by pressing FAN SPEED button on the unit.
J.POWER BUTTON: Turns the unit on and off.
K.LIGHT SENSOR: When in AUTO mode, this keeps the control panel lights dim and will not allow the fan to increase
above QUIET speed when the room is dark.
,QUIET, MEDIUM, HIGH: These levels are recommended for standard, daytime use.
HIGH wilt activate aulomatically when sensors detect high levels of impurities
in the air. QUIET, the lowest setting, is the energy saving mode.
o TURBO: The TURBO level, the highest fan speed, can be activated manua!ly for maximum air circulation+ The TURBO tevel will not automatically activate+
8