Installation Instructions (cont'd)
USE WITHOUT POWER CORD (cont'd)
3.A standard ½" conduit opening has been made in the water heater junction box for the conduit connection.
4.Use wire nuts and connect the power supply wiring to the wires inside the water heater's junction box.
5.The water heater must be electrically "grounded" by the installer. A green ground screw has been provided on the
water heater's junction box. Connect ground wire to this location. For complete grounding details and all allowable exceptions, refer to local codes or in the absence of local codes, with the latest edition of the National Electrical Code, ANSI/NFPA 70.
6. Replace the wiring junction cover using the screw provided.
WIRING DIAGRAM
ON/Or_
SWITCH
GAS
PRESSURE
L_rT 8WITCH
w
JI
_ /_ | [ r_ |
_I__LACK r
HOT
_EUTRALWHITE
GROUNDlBLACK
120V GAS
_E _WlTCH
_NDICATORUGHT I_V
O
Venting
AWARNING
To insureproperventingof this
adversey affectthe operaton ofthe water heater.
The combustion and ventilation air flow must not be obstructed.
AWARNING[
The water heater with draft hood installedmust be propertyI ventedto a chimneywhichterminatesoutdoors.Never
s onor asphyxation.
f | _IWARNING |
|
| Obstructedor deteHo_s | may presenta serious |
| health Hskor asphyxiation. |
|
W_ITE | PRESSURE |
| SWitCH |
| / |
I_V GAS
_LEN_r_
AWARNING | ] |
The vent pipe from the water heater must be 3" diameter |
|
PVC schedule40 pipe and must slope upward I/4 inch per
linear foot. | ] |
|
All vent gases must be completely vented to the outdoors of the structure (dwelling).
Failureto haverequired clearancesbetweenwater heater
•,WARNINGand
combustbe materialw resut n a fire hazard.
15