How to Install the Projector
■Installation sequence
Check the |
|
| Install the input | End | |
installation site | Prepare the screen. | Install the projector. | |||
devices. | |||||
and image size. |
|
|
| ||
|
|
|
| ||
See "Projection Distance and |
|
| PC, video deck, etc. |
| |
Screen Size" on page 17. |
|
|
|
|
■Adjusting the Tilt
The position and tilt angle of the projected screen can be adjusted by adjusting the adjustable feet.
Press both the left and right tilt adjustment levers to lift the main unit, and release them when the desired height is reached.
You can
Tilt Adjustment Lever
ExtendsRetracts
foot.foot.
Adjustable Feet
CAUTION
•Do not tilt the main unit at extreme angles by turning only one side of the adjustable feet. Doing so may cause the main unit to slip or fall down, resulting in accidents or failures.
•Vent A1 takes in air to cool the inside of the projector. As air is taken in by large suction force, cloth or paper may be sucked in against the vent. If this happens, the temperature inside may build up, and cause accident or failure.
•The rubber feet may soil the installation surface depending on where the projector is installed.
16