
Connecting to a Personal Computer
■If images of a personal computer are not projected
Check the following if images of a personal computer are not projected, or projected incorrectly.
●If images are not projectedIf the external output signals from a personal computer are not input to
The connection of
Some notebook PCs require a special operation to output the signals from the external output terminal. The external output signals may not be output from the notebook PC unless the operation is performed.
Refer to the manuals of your notebook PC for the information about how to output signals from the external output terminal.
Procedure example
•In the case of IBM PC/AT
Press Fn key and one of the keys F1 - F12 (Procedure may vary from models to models.)
List of countermeasures when the connection with the PC is defective
Maker | Series | Method to switch |
to external output | ||
IBM | Think Pad | Fn+f7 |
|
|
|
COMPAQ | CONTURA | Fn+f4 |
| ARMADA |
|
|
|
|
DELL | LATITUDE | Fn+f8 |
|
|
|
*This list is compiled based on the troubles that have occurred so far, so it does not include all kinds of connections.
*The company names, product names are the trade marks or registered trade marks of each company.
●Images are not projected correctly though they are displayed normally on the notebook PC.
1 Check the function of the notebook PC.There is a possibility that images are not projected correctly even through the images are displayed correctly on the LCD of the notebook PC. When images are displayed on two or more devices at the same time (e.g. images on the LCD and the signals are output to other devices at the same time), the input signals are outside the scanning frequency range of
In this case, the correct images cannot be obtained even by the adjustment of
21