Basic Operation
■Basic Operations in the OHP Mode
The functions described here can be operated only when OHP input is selected.
2,3
1
NOTE
•The projected image in the OHP display (projection of actual object) may be slightly distorted as a very wide- angle lens is used.
1Place the object you want to project.Open the document cover, and place the document or printed matter you want to project on the document pickup section.
Close the document cover.
NOTE
•Objects can be projected even if the document cover is not closed. However, unwanted objects will also be picked up, making the projected image difficult to view.
2 Main Unit Operation
ZOOM
You can adjust the zoom between 1x to 2x.
Pressing the button on the left reduces the image, and pressing the button on the right enlarges the image.
Remote Control Operation
ZOOM
3
Remote Control Operation
PUSH
SET
Press the arrow buttons on the remote controller to move the zooming position of the image.
Button: Moves the position up.
Button: Moves the position down.
Button: Moves the position to the left.
Button: Moves the position to the right.
29