Names and Functions of Each Section

Names and Functions of Each Section

Projector

Document Cover

The pickup section for documents and printed matter is located under this cover. See page 29.

Adjustment/Operation Panel

Buttons for setting adjustment menus and operating the projector are located here. Power ON/STANDBY, input selection, FREEZE, OHP zoom ratio, BRIGHTNESS, and other indicator LEDs are also located here.

See pages 12 and 13.

Air Vent A2

Air is discharged from the inside to the outside through this vent.

Air Vent A3

(bottom of main unit)

Air is taken in through this vent.

Anti-theft Lock

See the NOTE on the next page.

Adjustable Feet

These feet are for adjusting the tilt angle as well as the left and right balance of the projected image. Turning them counterclockwise raises the main unit, and turning them clockwise lowers the main unit.

See page 16.

Air Vent A1 (air filter)

Air is taken in through this vent. An air filter is provided to prevent dust from getting inside the projector.

See page 48.

Remote Control

Sensor

Projection Lens

Images are projected through this lens.

Tilt Adjustment Lever

Press this to adjust the adjustable feet.

See page 16.

Lamp Unit Cover (bottom of main unit)

The projection lamp unit is housed inside this cover.

See page 46.

Zoom Adjustment Ring

Turn this ring to adjust the screen size.

See page 26.

Focus Adjustment Section

Turn this to adjust the focus.

See page 27.

9