Maintenance
●When the power fails (all LEDs are off with the power ON) ❍ Action
1.Unplug the power plug from the power outlet.
2.Check the following and take corrective actions.
Is the ambient temperature
more than 35°C (95°F)?Use your projector within an ambient temperature of 0°C to 35°C (32°F to 95°F).
Are any vent holes blocked?
Is the lamp unit cover securely in place?
Place your projector away from walls and other objects. See "Do not block the air vents" on page 4.
Install the cover securely.
See "Lamp Unit Replacement" on page 46.
A probable cause is an internal circuit problem.
Ask your dealer for repair.
45