Kensington MT1075, MT1065 user manual E-26, Setting Screen of Auto 3D Reform, Adjustment

Setting Screen of Auto 3D Reform

1.Press the MENU button.

The Basic menu is displayed.

* When the Advanced menu is displayed, go to Step 3.

2.	Use the SELECT	or	button to highlight “To Advanced Menu” and
	press the ENTER button.
	The Advanced menu is displayed.
3.	Use the SELECT	or	button to highlight “Projector Options”.
	Press the SELECT		button. The “3D Reform” option is highlighted.
4.	Use the SELECT	or	button to highlight “Auto Functions”.
	Press the SELECT		button. The “Auto Functions” screen is dis-
	played.

Focus	See page E-49.
Wall Color
Correction	See page E-49.
3D Reform	Clear a check mark from the check box to disable
	the Auto 3D Reform.
Adjustment
Inside	Corrects so that an image is projected inside of
	the screen outline.
Outside	Corrects so that an image is projected outside of
	the screen outline.
Sensitivity	If the built-in sensor sensitivity is so strong that it
	recognizes even lines within the screen, select
	“Lower”. If the built-in sensor sensitivity is too weak
	to recognize the screen, select “Higher”.

NOTE: If you failed to correct for placing the image inside of the screen using [Inside], the projector automatically corrects to project the image larger than the outer frame of the screen.

E-26