Savin LD238c, LD232c, c3224, DSc332 Color Balance Program, Storing the adjusted color balance

Color Adjustment/Program

Color Balance

You can adjust the overall color tone when the overall copy is reddish or bluish.

Reference

For types and examples of the im- age adjustment functions, see p.iii “What You Can Do with This Ma-

3 chine <Color Functions/Color Ad- justments>”.

A Press the {Adjust/Program Color}

key.

B Make sure that [Color Balance] is selected.

C Adjust by pressing [Lighter] or [Darker].

Note

❒You can also register the adjust- ed settings. See p.88 “Color Bal- ance Program”.

D Press [OK].

Note

❒The indicator of the {Adjust/Pro- gram Color} key will light up when adjusting the color bal- ance.

❒The adjusted settings will be de- leted and the initial values will be reset when either Auto Clear has been performed, when the

{Clear Modes} key has been pressed or when the power has been turned off.

Color Balance Program

You can also store the color balance setting in memory and recall it when you want to use it.

Note

❒You can store up to 3 programs.

❒To change the registered settings, register them again. Previously registered settings will be over- written.

Storing the adjusted color balance

A Press the {Adjust/Program Color}

Key.

Reference

See p.88 “Color Balance”.

B Press [Program Color Balance]. C Press [Program].

D Select a number (1–3) for this set- ting.

The color balance setting will be registered in the selected number.

Note

❒If you select the program num- ber key where the m is dis- played, the previously registered settings will be overwritten. See p.89 “Changing the registered settings”.

E Press [OK].

88