Savin LD232c, LD238c, c3224 Changing the registered settings, Copying with the registered settings

Color Balance

Changing the registered settings

A Press the {Adjust/Program Color}

key.

B Make sure that [Color Balance] is selected, and then press [Program Color Balance].

C Select the program number (1–3) whose settings you want to change.

The registered color balance is dis- played.

D Change the registered settings.

E After the registered settings are changed, press [Program Color Bal- ance].

F Press [Program], and then select the program number to be over- written.

G Press [Register].

The settings are changed.

H Press [OK].

Copying with the registered settings

A Press the {Adjust/Program Color}

key.

B Make sure that [Color Balance] is selected, and then press [Program Color Balance].

C Make sure that [Recall] has been selected, and then select the pro- 3 gram that you want to use.

D Press [OK].

E Place the originals, and then press the {Start} key.

Note

❒The adjusted settings will be de- leted and the initial values will be reset when either Auto Clear has been performed, when the

{Clear Modes} key has been pressed or when the power has been turned off.

Deleting the registered settings

A Press the {Adjust/Program Color}

key.

B Make sure that [Color Balance] has been selected, and then press [Pro- gram Color Balance].

C Press [Delete], and then select the program that you want to delete.

D Press [Yes].

E Press [OK].

89