Savin LD238c, LD232c, c3224, DSc332 Slip Sheets, When using OHP transparencies from the bypass tray

Copying

Slip Sheets

Every time the originals' page chang- es, a slip sheet is inserted. This func- tion can be used to automatically insert a slip sheet between OHP transparencies, or as a stacking func-

2 tion. You can also copy onto slip sheets.

	1
1	2
2
3	3

Preparation

Before selecting this function, set the tray for slip sheets. See “Slip Sheet Tray” in “Tray Paper Set- tings”, General Settings Guide.

Note

❒Load slip sheets in the same size and orientation as copy paper or OHP transparencies.

❖ When using OHP transparencies from the bypass tray

• Copy

12

• Blank

12

Note

❒Press the {#} key and select [OHP Sheet] in Special paper. See p.24 “When copying onto OHP Trans- parencies or Thick Paper”.

❒Paper will be delivered to the ex- ternal tray when copying onto OHP transparencies or thick paper from the bypass tray, even if you have specified not to use the exter- nal tray as the output tray.

A Press [Cover/Slip Sheet].

B Press [Slip Sheet].

C Select [Copy] or [Blank], and then press [OK].

D Select the paper tray containing the sheet paper to copy the origi- nals.

When using OHP transparencies, open the bypass tray.

E Place the originals, and then press the {Start} key.

82