Savin LD238c, LD232c, c3224, DSc332, DSc338, C3828 operating instructions Double Copies, Limitation

Copying

Specified Area Repeat

You can use this function only when you are making a copy from the Ex- posure Glass.

	Note
2	❒ The base point X1, Y1, and the
	length set by point X2, Y2 deter-

mines the area of an image repeat- edly copied.

Limitation

❒You cannot use the specified area repeat from ADF.

G Enter the length of [X1] with the number keys, then press [#].

H Enter the length of [Y1] with the number keys, then press [#].

I Enter the length of [X2] with the number keys, then press [#].

J Enter the length of the [Y2] by number keys, then press [#].

K Press [OK] three times.

L Place the original on the exposure glass, and then press the {Start} key.

1.Set on the exposure glass

A Specify the location of the area's base point (X1, Y1), and its length and width (X2, Y2).

Note

❒You can set any value in the ra nge of X1 : 0~412mm (0” ~16 .2 ” ), X2: 20~432mm (0.8”~17.0”), Y1: 0~277mm (0”~10.8”), and Y2: 20~297mm (0.8”~11.6”).

B Select the size of the copy paper and the reproduction ratio.

C Press [Edit/Color Creation].

D Press [Edit Image].

E Press [Image Repeat].

F Press [Specified Area].

Double Copies

One original image is copied twice onto one sheet, as shown.

Note

❒You cannot use the bypass tray with this function.

❒See the following table for original and copy paper sizes and orienta- tions when using a 100% ratio:

64