Settings You Can Change with User Tools

Auto Tray Switching

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of pa- per (when Auto Paper Select is se- lected.) This function is called “Auto Tray Switching”. This set- ting specifies whether to use Auto Tray Switching or not.

Note

Default: With Image Rotation

[With Image Rotation] Use to copy when using the Auto Tray Switching function.

[Without Image Rotation] Only copies with Auto Tray Switch- ing if you load paper of the same size and in the same orien- tation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message “Load paper.” is displayed.

[Off] When a paper tray runs out of paper, copying is interrupted and the message “Load pa- per.” is displayed.

General Features 2/5

Duplex Mode Priority

You can select the type of the Du- plex function effective when the power is turned on, or modes are cleared.

Note

Default:

Metric version: 1 Sided1 Sided

Inch version: 1 Sided2 Sided

Copy Orientation in Duplex Mode

You can set the copy orientation

5

when making two-sided copies.

Note

Default: Top to Top

Original Orientation in Duplex Mode

You can set the original orientation when making two-sided copies.

Note

Default: Top to Top

Change Initial Mode

You can select standard mode or Program No.10 as the mode effec- tive when power is turned on, or modes are cleared.

Note

Default: Standard

Max. Copy Quantity

The maximum copy quantity can be set between 1 and 999.

Note

Default: 999 Sheets.

113

Page 127
Image 127
Savin LD232c, LD238c, c3224, DSc332, DSc338, C3828 operating instructions General Features 2/5