Savin DSc338 Preset Reduce/Enlarge, Base Point, Create margin function, Press Enlarge or Reduce

Copying

	A Press [Reduce/Enlarge].
Preset Reduce/Enlarge

You can select a preset ratio for copy- ing.

2

❖Base Point

The base point of Reduce/Enlarge differs depending on how the orig- inal was scanned. When the origi- nal is placed on the exposure glass, the upper left corner is the base point. When placed in the ADF, the bottom left corner is the base point.

GCKA031e

1.Base point when placed on the ex- posure glass.

2.Base point when placed in the ADF.

Reference

Related default settings:

p.116 “Shortcut R/E”

p.117 “R/E Priority”

Note

❒To select a preset ratio on the initial display, press the short- cut reduce/enlarge key, and then proceed to step D.

B Press [Enlarge] or [Reduce].

C Select a ratio, and then press [OK].

D Place originals, and then press the {Start} key.

-Create margin function

Use Create Margin to reduce the im- age to 93% of original size using the center as reference. You can assign this function to a shortcut key on the initial display. By combining it with the Reduce/Enlarge function, you can also provide the Reduce/Enlarge copy with a margin.

Reference

Related default settings:

p.114 “Copy Function Key: F1-F5”

p.117 “Ratio for Create Margin”

38