Series Copies, Centering, 136 | Savin LD238c, LD232c, c3224, DSc332

Specifications

❖Series Copies

•The machine sets the reproduction ratio automatically to meet the paper size and copies the originals together onto the paper.

•The reproduction ratios you can specify are 25–400%.

•If the calculated ratio is under the minimum ratio, it is automatically ad- justed to within acceptable range. However, with some ratios, parts of the image might not be copied.

•If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies proper- ly.

•You cannot copy with originals different in size and orientation.

•If the number of originals scanned is less than a multiple of 4, the last page is copied blank.

•In Magazine mode, the copying may take some time after scanning origi- nals.

•When the booklet finisher is installed, if you select Saddle Stitch function in Magazine mode, the machine staples and folds the paper in the center, then delivers the paper folded.

6	❖ Image Repeat

Depending on the paper size, ratio, and orientation, parts of repeated images may not be copied.

❖Centering

Though the original is set to a different orientation from the paper loaded, the machine will not rotate the image by 90° (Rotate copy).

136

Image 150

Savin LD238c, LD232c, c3224, DSc332, DSc338, C3828 operating instructions Series Copies, Centering, 136

Contents

Copy Reference Introduction Manuals for This Machine Manuals for DeskTopBinder V2 Lite Manuals for ScanRouter V2 LiteOther manuals Color Copying see p.29 Iii Convert Colors see p.31 Adjusting Colors see p.87 What You Can Do with This Machine Types of Duplex Copies Vii Copying Book Originals Sided Copying Originals Such as BooksSee p.60 Series Copies Viii Table of Contents Copier Functions Color Adjustment Color BalanceImage Adjustment User Color Storing Data in the Document Server Programs 139 Xii Page Preparation How to Read This ManualSymbols Limitation Machine Types Type Functions Requiring Optional Configurations Sadf Control Panel Sample Copy key Energy Saver keyInterrupt key Start key Display Panel Initial copy displayPage Originals Sizes and Weights of Recommended OriginalsWhere original is Placed Original size Original weight Metric version Originals not recommended for the Auto Document Feeder ADF Sizes Detectable by Auto Paper Select Exposure glass Missing Image Area Sizes difficult to detect4.0 mm, 0 5.0 mm, 0.06 Standard orientation Placing OriginalsOriginal Orientation Turn Turn Placing Originals on the Exposure GlassStandard orientation Press Special Original Batch When placing originals consisting of more than 80 pagesPlacing Originals in the Auto Document Feeder Limit mark Document guide Sadf Press Batch, and then press OK Placing originals of mixed sizes Placing custom size originalsPress Special Original Press Custm Size Origi Clear or the Clear/Stop key, and then enter the value again When clearing entered values Basic ProcedureHow to operate To check the settings When scanning is interrupted When the machine continues copyingInterrupt Copy Job Preset Left Original BeeperPress To Printing Copying from the Bypass Tray Open the bypass tray Press Select Size When copying onto standard size paperWhen copying onto custom size paper Press Custom Size When copying onto OHP Transparencies or Thick Paper Press OK Place the originals, and then press the Start key Top to top When Copying on the Back Side of the PaperOriginal and paper orientations Select OHP Sheet or Thick Paper Top to bottom When copying onto envelopes Select Plain Dup.Back or ThickDup.Back Copying from the Bypass Tray Making A3, 11 × 17 Full Bleed Copies Selecting a Color Mode Color Functions When Red & Black is pressed When the Single Color key is selectedWhen the Two-colorkey is selected When Two-coloris pressed Press Color Creation Press Convert Color Convert ColorsSelecting from User Color Conversion 1 to Conversion 4 and make the selection again Select the color to be erased Erase Color Color BackgroundSelecting from the User Color Select the background color, then press OK Manual image density Copier FunctionsAuto Image Density Combined auto and manual image density Selecting the Original Type Auto Paper Select Where original is placed Paper size and orientationSelecting Copy Paper Manual Paper Select If the paper type keys are not displayed Auto Paper SelectManual Paper Select Press Auto Paper Select Rotated copy Original size Copy paper size Orientation Create margin function Preset Reduce/EnlargeBase Point Press Enlarge or Reduce To select the ratio using n To enter the ratio using the number keysZoom Where original is Original size Placed Orientation Auto Reduce/EnlargePress Auto Reduce/Enlarge Size Magnification Directional Magnification % Directional Size Magnification Inch To enter the ratio usingTo specify a ratio using n Number keys Sort SortRotate Sort When the 2 tray finisher is installed When a finisher is not installedWhen the booklet finisher is installed Shift Sort If the sample is acceptable, press Print Sample copyChanging the number of sets Press Change Quantity When a finisher is installed Enter the number of copies using the number keysStack Stapling position and original setting StapleTray finisher Bottom Left Top Booklet finisher Tray finisher Booklet finisher Select one of the stapling positions Punch Holes Punch hole positions Tray finisher Original location Punch hole positions Exposure glass Holes Turn Holes Standard Turn Sided→1 Sided DuplexSided→2 Sided Original orientation and completed copies Select 1 Sided or 2 Sided for Originals and copy orientationPress Dup./Combine/Series Original, and then select 1 Sided or 2 Sided for Copy Sided Combine Orientation of the original and com- bine image positionPlacing originals originals placed in the ADF Place the originals, and then press Press 1 Sided or 2 Sided for OrigInal, and then press Combine Side for Copy Sided 4 Pages → Combine 2 Side Sided 16 Pages → Combine 2 SideFront Back Sided 8 Pages → Combine 2 Side Book→1 Sided Series CopiesBook→2 Sided Front&Back→2 Sided Open to left Copying Book OriginalsSided→Magazine Open to right Press Book Specified Area Repeat Image RepeatWhole Area Repeat Original 51/2 ×81/2K/Copy paper Double Copies Centering Positive/Negative MirrorPress Edit/Color Creation Press Edit Image Press Centering Center EraseBorder Center/Border Selecting Diff. Width Border EraseSelecting Same Width Center erase Press Center/Border Margin AdjustmentCenter/border erase Set the center and border to be erased Preset Stamp Press Erase/Margin Adj Press Margin AdjustmentPress Edit/Color Creation Changing the stamp color To change stamp position, size, and density Select the stamp number User StampPress User Stamp Press All Pages or 1st Page only to select the print Select the position, and then press OK To change the stamp positionTo program the user stamp Make sure the machines copier function is selected Original is scanned, To delete the user stampPress Start Scanning Stamp is registered Date Stamp Stamp position and original orientation Select the date format, and then press OK To change the date formatPress Change Format Select the date stamp position, and then press OK Numbering Stamp position and orientation of originals Press Page Numbering Specifying the first printing page and start numberIf you selected P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2… Select the format # key If you selected 1/5, 2/5…Press First Printing Page , then en Press Change on the right hand side of the display If you selected 1-1, 1-2,… To the endPress Change on the right hand side Front cover CoversFront/Back covers Press Cover/Slip Sheet Press Front Cover or Front/Back When using OHP transparencies from the bypass tray Slip SheetsPress Cover/Slip Sheet Press Slip Sheet Press Store File Enter a user name, file name, or password if necessaryStoring Data in the Document Server Press OK Place the originals Copying Press Register ProgramsStoring a Program Press the program number you want to store Recalling a Program Changing a stored programDeleting a Program Press Delete Color Adjustment Press the Adjust/Program ColorPress Adjust Color Color Balance Program Storing the adjusted color balanceColor Balance Press Program Color Balance. C Press Program Changing the registered settings Copying with the registered settingsDeleting the registered settings Image Adjustment Adjusting the text/photo sensitivity Adjusting the background densityAdjusting the U.C.R Press TNext Adjust by pressing Text or Adjusting Colors Based on the Selected Color User ColorSelect the number 1-15 you want to store the user color When renaming a color Using n oUsing With Number keys Selecting from user colors Deleting User Colors Press Custom SettingMixing Colors Manually with the Number Keys Sampling the User Colors When a Message Is Displayed Message Causes SolutionsIf Your Machine Does Not Operate As You Want Cannot staple pa Problem Causes Solutions If You Cannot Make Clear Copies If You Cannot Make Copies As You Want Basic Edit Stamp Combine Duplex100 When Memory Is Full 101 102 User Tools Menu Copier/Document Server Features User Tools Item Names Default Settings103 104 105 106 107 MM/DD/YYYY 108 User Tools Menu Copier/Document Server Features 109 110 Accessing User Tools Copier/Document Server FeaturesChanging Default Settings Select the menu you want to set Exiting User Tools 111 Settings You Can Change with User Tools General Features 1/5 General Features 2/5 Job End Call General Features 3/5Tone Original remains Copy Function Key F1-F5 Color Mode Priority General Features 4/5 General Features 5/5Clear Bypass Mode Two-color Mode Priority Reproduction Ratio 2/2 Priority Setting EnlargeReproduction Ratio 1/2 Shortcut R/E Edit 1/2 Erase Center Width Edit 2/2Erase Border Width Front Cover Copy in Combine Double Copies Separation Line Copy Order in CombineImage Repeat Separation Line 119 Separation Line in Combine Orientation Magazine120 Stamp Stamp Color 1 User Stamp 1/2-2/2 Program/Delete StampStamp Format 1 Date Stamp Format Superimpose Stamp SettingSize Numbering 1/3-2/3 Stamp Format Input/Output Adjust Color Image S. Priority 126 Combination Chart 127 Preset Enlarge/Reduce Supplementary SpecificationsMixed Size mode Bypass Tray Copy Directional Size Magnification ZoomSize Magnification 129 130 Paper size and orientation Paper capacity WeightSort, Rotate Sort, Stack Tray finisher Booklet finisher Supplementary Specifications 131 Staple 132Paper size Stapler capacity 133 Paper size and orientation Tray capacity Punch 134Tray finisher 135 Series Copies Centering136 Erase Margin AdjustmentPreset Stamp Date Stamp Numbering Front Cover, Front/Back CoverSlip Sheets Index 139 140 User stamp Copy orientation in duplex mode 141 142 OHP transparencies One-sided combine Setting 143 Memo 144 Means Power OFF. c means Stand by Type for C3224/DSc332/LD232c/Aficio 2232C EN USA B149-7509