Interrupt Copy, When scanning is interrupted | Savin DSc338, LD238c

Copying

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.

2	Limitation
	❒ You cannot use Interrupt Copy

when fax originals are being scanned.

A Press the {Interrupt} key.

The Interrupt indicator lights.

When scanning is interrupted

A Remove the originals that were being copied, and then place the originals you want to copy.

B Press the {Start} key.

Copying starts.

C When copying is complete, re- move the originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator turns off.

E When the display prompts you to do so, place the former set of originals again.

F Press the {Start} key.

Note

❒The previous copy job's set- tings are restored and the machine continues copying from where it left off.

When the machine continues copying

A Place the originals you want to copy.

B Press the {Start} key.

The machine stops the previous job and starts copying the new originals.

C When copying is complete, re- move originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator goes out.

The previous copy job's settings are restored and the machine continues copying from where it left off.

20

Image 34

Savin DSc338, LD238c, LD232c, c3224, DSc332 Interrupt Copy, When scanning is interrupted, When the machine continues copying

Contents

Copy Reference Introduction Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Color Copying see p.29 Iii Convert Colors see p.31 Adjusting Colors see p.87 What You Can Do with This Machine Types of Duplex Copies Vii Copying Book Originals Sided Copying Originals Such as BooksSee p.60 Series Copies Viii Table of Contents Copier Functions Color Adjustment Color BalanceImage Adjustment User Color Storing Data in the Document Server Programs 139 Xii Page Preparation How to Read This ManualSymbols Limitation Machine Types Type Functions Requiring Optional Configurations Sadf Control Panel Sample Copy key Energy Saver keyInterrupt key Start key Display Panel Initial copy displayPage Originals Sizes and Weights of Recommended OriginalsWhere original is Placed Original size Original weight Metric version Originals not recommended for the Auto Document Feeder ADF Sizes Detectable by Auto Paper Select Exposure glass Sizes difficult to detect Missing Image Area4.0 mm, 0 5.0 mm, 0.06 Standard orientation Placing OriginalsOriginal Orientation Turn Turn Placing Originals on the Exposure GlassStandard orientation Press Special Original Batch When placing originals consisting of more than 80 pagesPlacing Originals in the Auto Document Feeder Limit mark Document guide Sadf Press Batch, and then press OK Placing custom size originals Placing originals of mixed sizesPress Special Original Press Custm Size Origi Clear or the Clear/Stop key, and then enter the value again When clearing entered values Basic ProcedureHow to operate To check the settings When the machine continues copying When scanning is interruptedInterrupt Copy Left Original Beeper Job PresetPress To Printing Copying from the Bypass Tray Open the bypass tray Press Select Size When copying onto standard size paperWhen copying onto custom size paper Press Custom Size When copying onto OHP Transparencies or Thick Paper Press OK Place the originals, and then press the Start key Top to top When Copying on the Back Side of the PaperOriginal and paper orientations Select OHP Sheet or Thick Paper Select Plain Dup.Back or Thick Top to bottom When copying onto envelopesDup.Back Copying from the Bypass Tray Making A3, 11 × 17 Full Bleed Copies Selecting a Color Mode Color Functions When Red & Black is pressed When the Single Color key is selectedWhen the Two-colorkey is selected When Two-coloris pressed Press Color Creation Press Convert Color Convert ColorsSelecting from User Color Conversion 1 to Conversion 4 and make the selection again Select the color to be erased Erase Color Color BackgroundSelecting from the User Color Select the background color, then press OK Manual image density Copier FunctionsAuto Image Density Combined auto and manual image density Selecting the Original Type Auto Paper Select Where original is placed Paper size and orientationSelecting Copy Paper Manual Paper Select If the paper type keys are not displayed Auto Paper SelectManual Paper Select Press Auto Paper Select Rotated copy Original size Copy paper size Orientation Create margin function Preset Reduce/EnlargeBase Point Press Enlarge or Reduce To enter the ratio using the number keys To select the ratio using nZoom Auto Reduce/Enlarge Where original is Original size Placed OrientationPress Auto Reduce/Enlarge Size Magnification Directional Magnification % Directional Size Magnification Inch To enter the ratio usingTo specify a ratio using n Number keys Sort SortRotate Sort When the 2 tray finisher is installed When a finisher is not installedWhen the booklet finisher is installed Shift Sort If the sample is acceptable, press Print Sample copyChanging the number of sets Press Change Quantity Enter the number of copies using the number keys When a finisher is installedStack Staple Stapling position and original settingTray finisher Bottom Left Top Booklet finisher Tray finisher Booklet finisher Select one of the stapling positions Punch Holes Punch hole positions Tray finisher Original location Punch hole positions Exposure glass Holes Turn Holes Standard Turn Sided→1 Sided DuplexSided→2 Sided Original orientation and completed copies Select 1 Sided or 2 Sided for Originals and copy orientationPress Dup./Combine/Series Original, and then select 1 Sided or 2 Sided for Copy Orientation of the original and com- bine image position Sided CombinePlacing originals originals placed in the ADF Press 1 Sided or 2 Sided for Orig Place the originals, and then pressInal, and then press Combine Side for Copy Sided 4 Pages → Combine 2 Side Sided 16 Pages → Combine 2 SideFront Back Sided 8 Pages → Combine 2 Side Book→1 Sided Series CopiesBook→2 Sided Front&Back→2 Sided Open to left Copying Book OriginalsSided→Magazine Open to right Press Book Specified Area Repeat Image RepeatWhole Area Repeat Original 51/2 ×81/2K/Copy paper Double Copies Centering Mirror Positive/NegativePress Edit/Color Creation Press Edit Image Press Centering Center EraseBorder Center/Border Selecting Diff. Width Border EraseSelecting Same Width Center erase Press Center/Border Margin AdjustmentCenter/border erase Set the center and border to be erased Press Erase/Margin Adj Press Margin Adjustment Preset StampPress Edit/Color Creation Changing the stamp color To change stamp position, size, and density Select the stamp number User StampPress User Stamp Press All Pages or 1st Page only to select the print Select the position, and then press OK To change the stamp positionTo program the user stamp Make sure the machines copier function is selected Original is scanned, To delete the user stampPress Start Scanning Stamp is registered Date Stamp Stamp position and original orientation Select the date format, and then press OK To change the date formatPress Change Format Select the date stamp position, and then press OK Numbering Stamp position and orientation of originals Press Page Numbering Specifying the first printing page and start numberIf you selected P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2… Select the format # key If you selected 1/5, 2/5…Press First Printing Page , then en Press Change on the right hand side of the display To the end If you selected 1-1, 1-2,…Press Change on the right hand side Front cover CoversFront/Back covers Press Cover/Slip Sheet Press Front Cover or Front/Back Slip Sheets When using OHP transparencies from the bypass trayPress Cover/Slip Sheet Press Slip Sheet Press Store File Enter a user name, file name, or password if necessaryStoring Data in the Document Server Press OK Place the originals Copying Press Register ProgramsStoring a Program Press the program number you want to store Recalling a Program Changing a stored programDeleting a Program Press Delete Press the Adjust/Program Color Color AdjustmentPress Adjust Color Color Balance Program Storing the adjusted color balanceColor Balance Press Program Color Balance. C Press Program Copying with the registered settings Changing the registered settingsDeleting the registered settings Image Adjustment Adjusting the text/photo sensitivity Adjusting the background densityAdjusting the U.C.R Press TNext Adjust by pressing Text or User Color Adjusting Colors Based on the Selected ColorSelect the number 1-15 you want to store the user color When renaming a color Using n oUsing With Number keys Selecting from user colors Deleting User Colors Press Custom SettingMixing Colors Manually with the Number Keys Sampling the User Colors Message Causes Solutions When a Message Is DisplayedIf Your Machine Does Not Operate As You Want Cannot staple pa Problem Causes Solutions If You Cannot Make Clear Copies If You Cannot Make Copies As You Want Basic Edit Stamp Duplex Combine100 When Memory Is Full 101 102 User Tools Item Names Default Settings User Tools Menu Copier/Document Server Features103 104 105 106 107 MM/DD/YYYY 108 User Tools Menu Copier/Document Server Features 109 110 Accessing User Tools Copier/Document Server FeaturesChanging Default Settings Select the menu you want to set Exiting User Tools 111 Settings You Can Change with User Tools General Features 1/5 General Features 2/5 Job End Call General Features 3/5Tone Original remains Copy Function Key F1-F5 Color Mode Priority General Features 4/5 General Features 5/5Clear Bypass Mode Two-color Mode Priority Reproduction Ratio 2/2 Priority Setting EnlargeReproduction Ratio 1/2 Shortcut R/E Edit 1/2 Erase Center Width Edit 2/2Erase Border Width Front Cover Copy in Combine Double Copies Separation Line Copy Order in CombineImage Repeat Separation Line 119 Orientation Magazine Separation Line in Combine120 Stamp Stamp Color 1 User Stamp 1/2-2/2 Program/Delete StampStamp Format 1 Date Stamp Format Superimpose Stamp SettingSize Numbering 1/3-2/3 Stamp Format Input/Output Adjust Color Image S. Priority 126 Combination Chart 127 Preset Enlarge/Reduce Supplementary SpecificationsMixed Size mode Bypass Tray Copy Directional Size Magnification ZoomSize Magnification 129 130 Paper size and orientation Paper capacity WeightSort, Rotate Sort, Stack Tray finisher Booklet finisher Supplementary Specifications 131 132 StaplePaper size Stapler capacity 133 Paper size and orientation Tray capacity 134 PunchTray finisher 135 Centering Series Copies136 Erase Margin AdjustmentPreset Stamp Date Stamp Front Cover, Front/Back Cover NumberingSlip Sheets Index 139 140 User stamp Copy orientation in duplex mode 141 142 OHP transparencies One-sided combine Setting 143 Memo 144 Means Power OFF. c means Stand by Type for C3224/DSc332/LD232c/Aficio 2232C EN USA B149-7509