Placing Originals
17
1
Placing originals of mixed sizes
When placing different size originals
of the same width in the ADF togeth-
er, the machine automatically checks
the sizes of the originals and makes
copies.
Note
❒When placing same width origi-
nals of different sizes in the ADF
and making copies without using
the Mixed size function, parts of
the original image might not be
copied, or the paper might jam.
❒Copy speed and scanning speed
may slow down.
❒You can place originals of two dif-
ferent sizes at once.
❒Sizes of originals that can be
placed together using this function
are as follows:
A
AA
APress [Special Original].
B
BB
BPress [Mixed Size], and then press
[OK].
C
CC
CAlign the rear and left edges of
the originals as shown.
1. Place the originals into the ADF
2. Vertical size
D
DD
DAdjust the guide to the size of the
widest original.
E
EE
EPlace the aligned originals face
up in the ADF.
F
FF
FPress the {
{{
{Start}
}}
} key.
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
❒Paper with a vertical size of 128–
297 mm (5.1"–11.6") and a horizon-
tal size of 128–432 mm (5.1"–17")
can be placed with this function.
A
AA
APress [Special Original].
B
BB
BPress [Custm Size Origi.].
Metric
version
A3L, B4 JIS L, A4KL, B5
JISKL
Inch
version
11" × 17"L, 81/2" × 14"L,
81/2" × 11"KL
1
2
CP19AN
11X17
X14
0827JupiterC1_Copy_EN_F1_FM.book Page 17 Thursday, September 4, 2003 5:06 PM