Savin C3828 Sample copy, Changing the number of sets, If the sample is acceptable, press Print

Copier Functions

Sample copy

You can use this function to check copy settings before making a long copy run.

Note

❒This function can be used only when the Sort function is turned on.

A Select Sort and any other neces- sary functions, and then place the originals.

B Press the {Sample Copy} key.

One copy set is delivered as a sam- ple.

C If the sample is acceptable, press [Print].

The specified number of copies is made, minus one for the proof copy.

Note

❒If you press [Suspend] after checking the results, return to

step A to adjust the copy set- tings as necessary. You can change the settings for Staple, Duplex, Copy Orientation, Stamp, Margin Adjust, and Cover/Slip Sheet. However, de- pending on the combination of functions, you may not be able to change certain settings.

Changing the number of sets

You can change the number of copy sets during copying.

Note

❒This function can only be used

	when the Sort function is turned
		2
	on.
A While "Copying" is displayed,
	press the {Clear/Stop} key.
B Press [Change Quantity].

C Enter the number of copy sets us- ing the number keys, and then press the {#} key.

Note

❒The number of sets you can en- ter differs depending on when the {Clear/Stop} key is pressed.

D Press [Continue].

Copying starts again.

45