Savin c3224, LD238c Directional Size Magnification Inch, To enter the ratio using, Number keys

Copying

	B Press [Specifd. Ratio].
	C Press [Direct. Mag.%].
		To enter the ratio using the
		number keys
		A Press [Horizontal].
2
		B Enter the ratio using the num-
		ber keys, and then press [#].

CPress [Vertical].

DEnter the ratio using the num- ber keys, and then press [#].

EPress [OK].

To specify a ratio using [n] and

[o]

APress [With no].

BPress [Horizontal].

CAdjust the ratio using [n] or

[o].

Note

❒Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in in- crements of 10%.

❒If you have incorrectly en- tered the ratio, readjust it us- ing [n] or [o].

DPress [Vertical].

EAdjust the ratio using [n] or

[o].

FPress [OK].

D Press [OK].

E Place the originals, and then press the {Start} key.

Directional Size Magnification (Inch)

A suitable reproduction ratio is auto- matically selected when you enter the horizontal and vertical lengths of the original and copy image you require.

CP2M01EE

1.Horizontal original size

2.Vertical original size

3.Horizontal copy size

4.Vertical copy size

Preparation

Specify the vertical and horizontal size of the original and that of the copy, as shown.

Note

❒You can enter sizes within the fol- lowing ranges:

Metric	Vertical: 1–999 mm
version	(increments of 1 mm)
	Horizontal: 1–999 mm
	(increments of 1 mm)
Inch	0.1"–99.9" (increments of 0.1")
version

42