Savin DSc338, LD238c, LD232c, c3224, DSc332, C3828 operating instructions Punch, 134, Tray finisher

Specifications

• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or Auto Reduce/Enlarge function, “Blank part will appear. Check ori- entation.”message may appear depending on the orientation of origi- nals and paper you placed. In this case, change the paper orientation.

• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate images appropriately:

• Auto Reduce/Enlarge or Auto Paper Select

• With image rotation in Auto Tray Switching of User Tools

• If you select Saddle Stitch function with the booklet finisher, the machine staples and folds the paper in the center, then delivers the paper folded.

• If you select Saddle Stitch function in Magazine mode, the machine staples the paper, and folds it like a book, then delivers the paper folded.

❖ Punch

• When using Punch and Combine, Double Copies, or Auto Reduce/En-

	large, the message “Blank			part will appear. Check orientation.”
	may appear because of the orientation of the original and the copy paper.
	If this occurs, change the orientation of the copy paper.
	• Since punch holes are made in each copy, the punch hole positions vary slightly.
6	• Punchable paper sizes are as follows:
	2 tray finisher
	Punch kit type
	2 & 4 holes type	2 holes	L	A3-B5 JIS, 11" × 17"
			K	A4-A5, 81/2" × 11"
		4 holes	L	A3, B4 JIS, 11" × 17"
			K	A4, B5 JIS, 81/2" × 11"
	4 holes type	4 holes	L	A3-B5 JIS, 11" × 17"
			K	A4-A5, 81/2" × 11"
	2 & 3 holes type	2 holes	L	A3-B5 JIS, 11" × 17"
			K	A4-A5, 81/2" × 11"
		3 holes	L	A3, B4 JIS, 11" × 17"
			K	A4, B5 JIS, 81/2" × 11"
	Booklet finisher
	Punch kit type
	2 holes type	2 holes	L	A3, A4, B5 JIS, 11" × 17", 81/2" × 14", 81/2" × 11"
			K	A4, 81/2" × 11"
	4 holes type	4 holes	L	A3, A4, B4 JIS, B5 JIS, 11" × 17", 81/2" × 14", 81/2" × 11"

KA4, B5 JIS, 81/2" × 11"

•The punch hole positions change according to the orientation of the paper selected.

134