Savin LD238c, LD232c, c3224, DSc332, DSc338, C3828 Copying from the Bypass Tray, Open the bypass tray

Copying

Copying from the Bypass Tray

2

Use the bypass tray to copy onto spe- cial paper such as OHP transparen- cies, thick paper, thin paper, and copy paper that cannot be loaded in the pa- per trays.

❒ When copying onto OHP transpar-

encies or paper heavier than 128

g/m2 (about 34 lb.), you need to

specify the paper type. See p.24

“When copying onto OHP Trans-

parencies or Thick Paper”.

Preparation

When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series] (for example [1 Sided] → [1 Sided].)

Note

❒The machine can automatically de- tect the following sizes as standard size copy paper:

Metric	A3L, A4L, A5L, B4 JISL,
version	B5 JISL, B6 JISL
Inch	11" × 17"L, 81/2" × 11"L,
version	51/2" × 81/2"L

❒Select the paper size when making horizontal copies.

❒If you use non-standard size copy paper or special paper, you should input its vertical and horizontal di- mensions directly. See p.17 “Plac- ing custom size originals”. The sizes you can input are as follows:

Metric	• Vertical: 90.0 – 305.0 mm
version	• Horizontal: 148.0 – 457.2
		mm
Inch	•	Vertical: 3.55" – 12.00"
version	•	Horizontal: 5.83" – 18.00"

❒ You must specify the paper size

when using paper (tracing paper,

etc.) of less than 59g/m2 thickness.

❒ The maximum number of sheets

you can load at one time depends

on paper type. The maximum

number of sheets should not ex-

ceed the upper limit.

❒ Some kinds of envelopes might

cause misfeed and wrinkle. If this

happens, push down the fusing

unit's green lever. See p.26 “When

copying onto envelopes”. Also, be

sure to place the front face of the

envelope downward.

❒ Paper of 433 mm in length, or larg-

er, is likely to jam, crease, or not

feed in properly.

A Open the bypass tray.

ZKVH120J

22