Setup of the Graphical Remote Control (GRC) unit

 

Setting up the GRC according to other components (Set Up)

15

 

In the initial condition, the setup codes for CD, MD and DVD have already been pre-registered. The GRC can also be used to remote control other components which are not connected through system control cords.

In the operations of the GRC (Graphical Remote Control unit), proceed to each step within 10 seconds after the previous step.

The display disappears in 10 seconds.

To resume GRC display, move the Joystick in any directions.

Registering setup codes for VIDEO 1

1Enter the setup code.

1Select the ”SET UP“ icon.

2Select the ”Preference“ icon.

3Press the ”IR“ icon.

4Press the ”Input“ icon to open the list of available jack sets.

5Press the “Device” icon to select the type of device you have connected to the jack set.

6Press the “Brand” icon to select the device’s brand.

Select the icon with or .

1CD

2MD/TAPE 1

3 VIDEO 1

4 VIDEO 2

5 DVD/DVD 6CH

6 TV 1

7 TV 2

8 TAPE 2/MONI.

Select the icon with or .

1CD

2 TAPE

3 MD

4 VCR

5 CABLE

6 SATELLITE

7 TV

8 LD

9 DVD

0 Nothing

Continued to next page