Kenwood C-V751 Playing music, 5 ) dB, VO L

Playing music

The following procedure allows to play a MD,CD or cassette tape.

Preparations

÷Connect components as described in “System connection”.

5

÷Complete “Setup of the Graphical Remote Control (GRC)

unit”.@

1Press the ON/STANDBY key to ON.

Main unit GRC

ON/STANDBY

ON/STANDBY

2Select the input source.

Main unit GRC

(Select the icon)

	u s
m	i
	c

INPUT

or

÷Step 3 can be omitted if the easy operation feature is available.

“Easy operation feature” ™

Sound adjustment

27

÷Load the CD player or cassette deck with the software to be played. \Read the instruction manuals of the associated components.

With the main unit operation, the input sources are switched as shown below.

1 TUNER (frequency display)	The selected source is displayed.
2 CD
3 MD/TAPE 1	AUTO STEREO		CD
	MEMO.TUNED	F M
4 DVD/DVD 6ch INPUT *1	RDS EON TP	A M
	MUTEPTY TACLIPNEWS	LW
		MW
5 VIDEO 1
6 VIDEO 2

Pressing and holding the AUTO key for more than 2 seconds allows the source to be switched as shown below.

*1: To change the DVD display to DVD 6ch INPUT or LD display

To enable system-control operation, the displayed information should

be set according to the actually connected components. 0

3Play the selected source.

Main unit		GRC
	(Select the icon)
	CD			MD
Operation on each			or
source component

4Adjust the volume.

Main unit	GRC
VOLUME CONTROL

		M	UP	To increase volume
		E
O	L	U
V
DOWN				To decrease volume

DOWN	UP
To	To
decrease	increase
volume	volume

Volume level is displayed.

AUTO STEREO		VO L	_	AUTO SOUND	DIGITAL
MEMO.TUNED	F M			DTS DOLBY	DIGITA
RDS EON TP	A M			PRO LOGIC	3 ST
PTY TA NEWS	MW			MHz SLEEP	DOWN
MUTE CLIP	LW			5 ) dB KHz TIMER 1 2 TAPE2/

÷Rotating the VOLUME CONTROL at a higher speed increases the amount of volume change (AI VOLUME function).

÷The sound of input source cannot be listened to while TAPE 2/

MONITOR is ON. •