Kenwood C-V751 Specifications, For C-V751

Specifications

Caution : Read this page carefully to ensure safe operation.

For C-V751

Audio section

Total harmonic distortion (1 kHz, 1V)

Signal......................................................................................to noise ratio (IHF’66)	0.01 %

CD ..................................................................................	93 dB
Input..................................................................sensitivity / impedance	200 mV / 47kΩ
CD	200 mV / 47kΩ
Tone controls
BASS ......................................................	± 10 dB (at 100 Hz)
TREBLE ..................................................	± 10 dB (at 10 kHz)
Output level...................................................../ impedance	200 mV / 1 kΩ
TAPE REC	200 mV / 1 kΩ

Video section

VIDEO inputs / outputs	1 Vp-p/75 Ω
(composite) .......................................................

Digital section

Sampling.........................................................frequency..........................................................	32 kHz,44.1 kHz,48 kHz
Digital input	0.5 Vp-p/75 Ω
(coaxial)	0.5 Vp-p/75 Ω
(optical) .....................	-15 dBm~-21 dBm, 600 nm ± 30 nm

AM Tuner section (for Australia)

Tuning frequency range .........................	531 kHz ~ 1,602 kHz
Usable sensitivity
(30% mod., S/N 20 dB) .....................	20 µV / (700 µV / m)
Signal to noise ratio
(at 30% mod. 1mV input) ..........................................	48 dB

General

Power consumption ........................................................		35 W
AC outlet
UN SWITCHED (for Australia) ...........	1: (Total 100 W max)
UN SWITCHED (except Australia) ....	2: (Total 100 W max)
Dimensions .......................................	W:	400 mm (15-3/4”)
..........................................	H:	105 mm (4-1/8”)
..........................................	D:	382 mm (15-1/16”)
Weight (net) ....................................................		5.2 kg (11.4 lb)
Weight (net) (For Australia)...........................		5.1 kg (11.2 lb)

FM Tuner section

Tuning frequency range	......................... 87.5 MHz~108 MHz
Usable sensitivity (DIN)	1.2 µV (at 75 Ω) / 13.2 dBf
MONO ........................................
	1.2 µV (at 75 Ω) / 13.2 dBf	(40 kHz dev., S/N 26 dB)
STEREO .........................................	35 µV (at 75 Ω) / 42 dBf
	(46 kHz dev., S/N 46 dB)

Signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.)


MONO ...............................................		65 dB (65.2 dBf input)
STEREO ............................................		60 dB (65.2 dBf input)
Selectivity (DIN ± 300 kHz) ...........................................		64 dB
Stereo separation (DIN, 1 kHz)		.................................... 36 dB
Frequency response ..........	30 Hz~15 kHz, + 0.5 dB, – 3.0 dB

MW Tuner section

Tuning frequency range ........................	531 kHz ~ 1,602 kHz
Usable sensitivity
(30% mod., S/N 20 dB) .....................	20 µV / (700 µV / m)
Signal to noise ratio
(at 30% mod. 1mV input) ..........................................	48 dB

LW Tuner section

Tuning frequency range ...........................	153 kHz ~ 279 kHz
Usable sensitivity
(30% mod., S/N 20 dB) ..............................................	35 µV
Signal to noise ratio
(at 30% mod. 1mV input) ..........................................	45 dB

1. KENWOOD follows a policy of continuous advancements in development. For reason specifications may be changed without notice. Notes 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).