Kenwood C-V751 Digital connections

System connection

Digital connections 7

Make connections as shown below.

The digital in jacks can accept DTS, Dolby Digital (AC-3) or PCM signals. Connect components capable of outputting DTS, Dolby Digital (AC-3) or standard PCM (CD) format digital signals.

When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting.

Do not connect the power cord to a wall outlet until all connections are completed.

Connect components capable of outputting Dolby Digital (AC-3) or standard PCM format digital signals.

To connect an LD player with a DIGITAL RF OUT.

Connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Then connect the demodulator to the AC-3 AUDIO INPUT DIGITAL IN. Connect the video signal and analog audio signals to LD jacks (See "Connection

An LD player and DVD player cannot be connected simultaneously when an RF demodulator is used.

AC-3 DIGITAL OUT

of video components".)

DIGITAL OUTPUT		RF INPUT	DIGITAL INPUT		DC IN
	COAX.	AC-3 RF	COAX.	OPT.

6

To connect an LD player with a DIGITAL OUT

AC-3 RF OUT

RCA pin cord

		VIDEO		CD	DVD
				(OPTICAL 1) (COAXAL)
REC	PLAY	PLAY	DVD/	MONITOR	DIGITAL IN
			6CH.INPUT	OUT
VIDEO 1		VIDEO 2
			CD	MD/TAPE 1	TAPE 2/MON	FRONT
L
R
REC	PLAY	PLAY	PLAY	REC PLAY	REC PLAY

AC-3 RF Demodulator (DEM-9991D) (option)

To connect a DVD player with a DIGITAL OUT

COAXIAL DIGITAL OUT

Connect the video signal and analog audio signals to the DVD jacks.

(See "Connection of video components".)

6

The connected components are given as examples because the available models vary depending on marketing areas.