34
2Set the input mode to DIGITAL AUTO (MANUAL).
Main unit | GRC |
INPUT MODE | 1 Set the input mode to “DIGITAL AUTO |
| (MANUAL)”. |
| (Select the icon) |
Recording
Main unit
Each press switches the indication.
|
| 1 DIGITAL AUTO | Input signal is detected automatically. | |
| ||||
|
| 2 DIGITAL MANUAL | Selected input signal is held. | |
| ||||
| ||||
|
| 3 ANALOG |
| |
|
| |||
|
|
|
|
|
|
| GRC |
|
|
|
| 1 DIGITAL AUTO | Input signal is detected automatically. | |
|
| 2 DIGITAL MANUAL | Selected input signal is held. | |
| ||||
|
| |||
÷The switching is not available when the DVD 6ch INPUT is selected.
•
÷“3 ANALOG” cannot be selected when the input signal is the DTS signal.
÷Each press of 
or 
switches the display between “Source” and “Destination” alternately.
3Select the DIGITAL REC mode.
AUTO REC MODE
Main unit
1Set the REC mode to “AUTO REC
DIGITAL | MODE”. |
REC | |
| 2 Put the cassette deck (MD recorder) in |
|
MANUAL REC MODE
Main unit
Method 1
DIGITAL | 1 Play the source to be recorded. |
REC | 2 Set the input mode to “MANUAL REC |
| |
| MODE”. |
3Apply decoding that matches the input signal from the source selected and played in “1” above.
Method 2
1Set the input mode to “MANUAL REC MODE”.
2Play the source to be recorded.
3If audio is not output, switch the decoder by pressing the LISTEN MODE key.
Main unit
Each press switches the indication.
1 REC MODE OFF | Off |
2AUTO REC MODE
3 MANUAL REC MODE
Switch on the REC MODE to record a digital input source. Usually use the AUTO REC MODE to record audio input sources. When the digital mode changes during recording in the AUTO REC MODE, the audio may be interrupted momentarily. To record the audio from the beginning of the digital mode change, use the MANUAL REC MODE.
÷The input is automatically
÷Recording is not available when the DVD 6ch INPUT is selected.•
÷The EON overriding does not occur during recording.
÷For the recording using a cassette deck or MD recorder, read the instruction manual of the cassette deck or MD recorder.
÷The LISTEN MODE key can be used to switch the decoder only when the MANUAL REC MODE is selected.
÷Sound may not be reproduced when the input signal and LISTEN
MODE are selected improperly.
How to select the digital input, analog input and LISTEN MODE.E
Continued to next page