Listening to radio broadcasts

 

 

 

 

 

 

 

 

 

The AUTO MEMORY function gives precedence to RDS

 

 

 

 

 

 

 

Order of radio station presetting

 

 

stations and assigns them from preset number 1. Therefore,

 

 

when it is required to preset RDS stations as well as non-RDS

 

Other stations than the RDS stations can be stored in the

41

 

stations, execute the AUTO MEMORY operation first then

 

 

 

preset memory by presetting them after the RDS stations

 

 

proceed to the manual memory operation of non-RDS sta-

 

 

 

 

preset by AUTO MEMORY as shown below or overwrit-

 

 

tions.

 

 

ing the RDS stations preset in some preset numbers.

 

 

Preparation

 

 

Preset number

 

 

 

 

 

 

 

1 2

 

39 40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

÷ Select the TUNER input.

(

1 AUTO MEMORY

~

2 Manual memory

 

 

÷ Display the Tuner operation menu. (

 

RDS stations

FM, MW or LW stations

 

 

 

 

 

(~ FM stations)

 

FM, AM stations (Australia only)

 

 

 

 

 

 

 

 

 

 

Storing radio stations manually in preset memory

GRC

1Perform step 1~4 of “Tuning radio sta-

tions”

°

÷ Apart from the auto memory function, radio stations can also be stored

 

 

manually in the preset memory.

2Press the “Memo” icon during receiving a station.

3 Select the preset channel for use in presetting the station.

÷ It is also possible to assign a station name to the manually preset station.

÷ Repeat steps 1,2,3,4 for each of the stations to be stored in memory.

÷ If a station is stored in a preset number which has already stored a station memory under it, the previous memory is replaced by the new memory content.

÷ If RDS stations are stored manually in the preset memory, the PS may

4 Press the “Enter” icon. (Select the icon)

not be included in the memory depending on receiving conditions.

5Assigning a name to preset memory. (Select the icon)

6Select the preset channel to be named by

pressing or .

To decresase

To incresase

7Press the “Name Input” icon to select the name input mode.

(Select the icon)

8Compose a name.

÷ The name can be composed using up to 8 characters.

÷ Touch to access to lowercase characters. Touch it again to access special characters (such as @, !, &, etc.). Touch it a third time to return to uppercase characters.

÷ Touch or to move back and forth between the characters.

÷ Touch BS (Backspace) to clear the last caracter you entered. Touch ALL DEL to delete all the characters in the line.

Continued to next page