10 - ELECTRICAL SECTION
IMPORTANT: The appliance must be installed in accordance with the manufacturer’s instructions.
Incorrect installation, for which the manufacturer accepts no responsi- bility, may cause damage to per- sons, animals and things.
GENERAL
–Connection to the mains must be carried out by qualified personnel in accordance with current regulations.
–The appliance must be connected to the mains checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.
–The cooker can be connected directly to the mains placing an omnipolar switch with minimum opening between the contacts of 3 mm between the appliance and the mains.
–The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point.
–Once the cooker has been installed, the switch or socket must always be accessible.
N.B. For connection to the mains, do not use adapters, reducers or branching devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system call an expert.
He should also check that the socket cable section is suitable for the power absorbed by the appliance.
IMPORTANT: this cooker must be connected to a suitable double pole control unit adjacent to the cooker.
NO DIVERSITY CAN BE APPLIED TO THIS CONTROL UNIT.
IMPORTANT:
This appliance must be earthed.
28
Before effecting any intervention on the electrical parts of the appli- ance, the connection to the net- work must be interrupted.
The connection of the appliance to earth is mandatory.
The manufacturer declines all responsibility for any inconve- nience resulting from not observing this condition.
