Kenwood DM-9090 Recording Digital input, Digital recording, Select one of Digital 1, 2

Recording (DIGITAL input)

DM-9090 (En)

Recording is possible using recordable Mini Discs. When this unit is connected with a component equipped with digital output, such as a CD player, through a digital cord or optical fiber cable, the signal input through the DIGITAL input jack can be recorded

28 in the digital format (this recording is referred to as digital recording). Enjoy high-quality sound of digital recording!

Preparation

1 Open the write protect tab of the Mini Disc to make it recordable.	7
2 Load the Mini Disc.
3 Check the remaining recording time.	o
4 Set the amplifier’s input selector to the source to be recorded.

DIGITAL recording

1Adjust the settings if required.

1 Switch the REC MODE on.

REC MODE /CHARA.

2Select the setting adjustment mode.

JOG DIAL

4 ¢￿

DOWN U P

PUSH SET

3Set the selection (by pressing the JOG

DIAL).

JOG DIAL

4 ¢￿

DOWN U P

PUSH SET

Go to step 2 if setting adjustments are not required.

Each press switches the mode. 1 REC MODE : off

2REC MODE : on (“D.REC LEVEL?” displayed.)

The modes are switched by rotating the JOG DIAL.

1 D. REC LEVEL?	: Digital recording level setting.
2 AUTO TIME?	: Setting of the time for detecting a no-sound
	blank section during automatic track num-
	ber marking.

3AUTO LEVEL? : Setting of the level for detecting a non- sound blank section during automatic track number marking.

4 FADE TIME?	: Setting of the fading time in fade-in and
	fade-out.

5REC= WRITING? : Setting of the UTOC writing after recording.

ÖFor details on the setting adjustment modes, see “REC MODE key”.

¢

2Select one of “DIGITAL 1, 2 and 3”.

REC INPUT

3To fade in and fade out the music.

Press in stop mode.

FADE/

DELETE

4Select AUTO or MANUAL.

AUTO/

MANUAL

Each press switches the mode.

1 ANALOG : Analog “stereo mode”

2DIGITAL 1 : Coaxial input mode

3 DIGITAL 2 : Optical input mode

4 DIGITAL 3 : Coaxial input mode

5 MONO : Analog “monaural long-play mode”

Each press switches the mode.
1 FADE not lit : Fade mode is off
2 FADE lit	: Fade mode is on

ÖFor details on fade-in and fade-out, see “When FADE TIME? is displayed” (°) and “Faded recording of MD” (¼).

Each press switches the mode.

1 goes off (AUTO) : Track numbers are marked automatically.

£

2 MANUAL : Track numbers can be marked as desired.

£