Kenwood DPX-MP3120, DPX-U5120, DPX-U6120 1 –, SRC, ATT, 4 ¢ LOG VOL, Call Waiting, During a Call, Select “ANSWER”, Receiving a Call, Enter a PIN code, 3Enter a PIN code, Step 2. Connection

Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)

Operation of hands-free phoning

1 – 6

SRC	DISP
	ATT
	4 ¢ LOG VOL

Connecting a Bluetooth Device

Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary.

Step 1. Pairing (Registering from Bluetooth devices)

To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing).

⁄

•When registering from this unit, refer to <Registering Bluetooth device> (page 43).

Receiving a CallAnswering a Phone Call

Press the [VOL] knob.

⁄

•The following operations disconnect the line:

-Insert a CD.

-Connect a USB device.

•The name of the calling party is displayed if it has already been registered in the Phone Book.

Rejecting an Incoming Call

Press the [SRC] button.

During a Call

1Turn on this unit Press the [SRC] button.

2Start registering a this unit by operating the Bluetooth device

By operating the Bluetooth device, register the hands-free unit (pairing). Select “KCA-BT200”/ “KCA- BT300” from the list of connected units.

3Enter a PIN code

Input the PIN code (“0000”) in the Bluetooth device.

Check that registration is complete on the Bluetooth device.

✍✍PIN code is set to “0000” as the default. You can change this code. Refer to <Registering PIN Code> (page 44).

4By operating the Bluetooth device, start hands- free connection.Step 2. Connection

If you have registered 2 or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 44).

When a cell-phone is connected, the “BT” indicator is light up.

Step 3. Hands-free phoning

You can do hand-free phoning when the connection is made.

Disconnecting a Call

Press the [SRC] button.

Switching to the Private Mode

Press the [6] button.

Switches between Private talk (“PRIVATE”) and Hands-free talk each time this button is pressed.

⁄

•Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your cell-phone to return to the hands-free talk mode.

Adjusting the Voice Volume during a Call Turn the [VOL] knob.Call WaitingAnswering Another Incoming Call with the Current Call Suspended1Press the [VOL] knob.2Turn the [VOL] knob and press it when the desired item is displayed.Select “ANSWER”.Answering another Incoming Call after Terminating the Current Call

Press the [SRC] button.

20 DPX-U6120/ DPX-U5120/ DPX-MP3120