Select “Audio Control” > “Detailed Setup” > “X’Over”.

4Select the speaker you want to set

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Front”, “Rear”, or “SubWoofer”.5Select the item you want to set

Operation type

Operation

Selects the item.

Turn the [VOL] knob.

Adjust each item.

Press the [4] or [¢] button.

Set the value

Press the [VOL] knob.

6Repeat steps 4 to 5 to complete the X’Over settings.7Exit Function setting mode

Press the [   ] button for at least 1 second.

Audio Preset Memory

Registering the value setup by Sound Control.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Car Type Selection> (page 37)

-<Speaker Setting> (page 37)

-<Car Type Fine Adjustments> (page 38)

-<X’Over Setting> (page 38)

-<Manual Equalizer Control> (page 33)

-<Listening Position Selection> (page 34)

-<Listening Position Fine Adjustments> (page 34)

2Enter Audio preset memory mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Audio Control” > “Detailed Setup” > “Preset” > “Preset Memory”.

3Select the number to put in the memory Turn the [VOL] knob and press it when the desired item is displayed.

Select a preset number.4Turn the [VOL] knob and press it when the desired item is displayed.

Select “YES”.

“Memory Completed” is displayed.

5Exit Function setting mode

Press the [   ] button for at least 1 second.

⁄

•Register 6 patterns of Audio Preset Memory.

•Preset number “1”:

When you press the Reset, all the sources will be the setting value which is registered.

•Preset number “1” and “2”:

The memory cannot be erased by the Reset button.

•This function cannot be registered when the iPod Equalizer set in <Preset Equalizer curve Select> (page 33).

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 39).

1Select the source Press the [SRC] button.

Select a source other than “STDBY”.

2Enter Function setting mode Press the [VOL] knob.

3Enter Audio preset recall mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Audio Control” > “Detailed Setup” > “Preset” > “Preset Recall”.

4Select the number to recall in the memory Turn the [VOL] knob and press it when the desired item is displayed.

Select preset number.5Turn the [VOL] knob and press it when the desired item is displayed.

Select “YES”.

“Recall Completed” is displayed.

6Exit Function setting mode

Press the [   ] button for at least 1 second.

⁄

•The “User” of <Preset Equalizer curve Select> (page 33) is changed to the value which was recalled.

•The Equalizer curve is changed to the value which was recalled by the selected source.

English 39