Kenwood DPX-MP3120, DPX-U5120, DPX-U6120 SRC, VOL, Display, Remarks, Overview, Make a setting, 5Make a setting, Select “AUDIO CONTROL”, Enter Audio Control mode, 3Enter Audio Control mode

Function of DPX-U5120/ DPX-MP3120

Audio Adjustments – DPX-U5120/ DPX-MP3120 –

SRC

VOL

Audio Control

You can adjust the following Audio Setting items.

Display			Overview
“AUDIO CONTROL”
	“SUBWOOFER SET”		Turns on/off the subwoofer output.
			“OFF”/ ”ON”
	“SYSTEM Q”		Switches between the following preset
			equalizer curves.
			“NATURAL”/ “USER”/ “ROCK”/ “POPS”/
			“EASY”/ “TOP40”/ “JAZZ”/ “GAME”
			For USER: This appears when Bass level,
			Middle level, and Treble level are
			adjusted.
	“BASS ADJUST”		You can set bass for each source.
		“BASS FREQ”	Bass Center Frequency
			40/50/60/70/80/100/120/150 (Hz)
		“BASS LEVEL”	Bass level
			“–8” — “0” — “+8”
		“BASS Q”	Bass Q Factor
			1.00/1.25/1.50/2.00
		“BASS EXT”	Bass Extend
			”ON”/ “OFF”
	“MID ADJUST”		You can set middle for each source.
		“MID FREQ”	Middle Center Frequency
			0.50/1.00/1.50/2.00 (kHz)
		“MID LEVEL”	Middle level
			“–8” — “0” — “+8”
		“MID Q”	Middle Q Factor
			1.00/2.00
	“TRE ADJUST”		You can set treble for each source.
		“TRE FREQ”	Treble Center Frequency
			10.0/12.5/15.0/17.5 (kHz)
		“TRE LEVEL”	Treble level
			“–8” — “0” — “+8”
	“BALANCE”		Adjusts left/right speaker balance.
			(Left) “L15” — “0” — “R15” (Right)
	“FADER”		Adjusts front/rear speaker balance.
			(Rear) “R15” — “0” — “F15” (Front)
	“SUB-W LEVEL”		You can set subwoofer level.
			“–15” — “0” — “+15”

“DETAILED SET”
	“LPF	Selects cut off frequency of subwoofer output.
	SUBWOOFER”	“85”/ “120”/ “160”/ “THROUGH” (OFF) Hz
	“SUB-W PHASE”	Selects the phase of subwoofer output.
		“REVERSE” (180°)/ “NORMAL” (0°)
	“SUPREME SET”	Turns on/off the supreme function.
		Can be set while Audio file source of CD/USB
		(excluding iPod).
		“ON”/ “OFF”
	“VOLUME	Sets each source’s volume as a difference from
	OFFSET”	the basic volume.
		“–8” — “0” (AUX: “–8” — “0” — “+8”)
		(	: Factory setting)

1Select the source Press the [SRC] button.

Select a source other than “STANDBY”.

2Enter Function setting mode Press the [VOL] knob.

3Enter Audio Control mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “AUDIO CONTROL”.

4Select the setting item to adjust

Turn the [VOL] knob and press it when the desired item is displayed.

5Make a setting

Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

6Exit Function setting mode

Press the [   ] button for at least 1 second.

⁄

•The “SUB-W PHASE” item can be made when a setting other than “THROUGH” is selected for the “LPF SUBWOOFER” item.

Remarks

• Supreme

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).

Supplementing is optimized by compression format (MP3, WMA and AAC) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

36 DPX-U6120/ DPX-U5120/ DPX-MP3120