Clock and Other Functions
Function of
You can adjust the clock and date.
1Enter Clock adjustment modePress the [B.BOOST] button for at least 1 second.The hour display blinks.
2Adjust the hourTurn the [VOL] knob to adjust the hour, and then press the [VOL] knob.The minute display blinks.
3Adjust the minuteTurn the [VOL] knob to adjust the minute, and then press the [VOL] knob.Finish the Clock Adjustment.
Initial SettingsYou can select the following Initial Setting items.
1Select the Standby Press the [SRC] button.
Select the “STDBY”/ “STANDBY” display.
2Enter Function setting mode Press the [VOL] knob.
3Enter Initial Setting modeTurn the [VOL] knob and press it when the desired item is displayed.
Select “Initial Settings”/ “INITIAL SET”.4Select the setting item to adjust Turn the [VOL] knob.Display | Overview | |
“Initial Settings”/ |
| |
“INITIAL SET” |
| |
| “Source Select” * | Sets the source selection method. |
|
| Select “2” to change the source selection |
|
| method. Press the [SRC] button, turn the [VOL] |
|
| knob to select the source, and then press the |
|
| [VOL] knob to determine it. |
|
| “Settings 1”/ “2” |
| “Tuner Preset | Sets the Tuner preset type. |
| Type”/ “PRESET | “Type Normal”/ “TYPE NORMAL”: 1 station |
| TYPE” | can be assigned to 1 preset button in each |
|
| of 4 bands (FM1, FM2, FM3, and AM), i.e., |
|
| a total of 24 stations (6 stations x 4 bands) |
|
| can be preset. |
|
| “Type Mixed”/ “TYPE MIXED”: A total of 6 |
|
| stations can be assigned to a total of 6 preset |
|
| buttons regardless of band (FM1, FM2, FM3, |
|
| and AM). You can recall a preset station |
|
| without switching between bands. |
30
| “Beep”/ “KEY | Setting the operation check sound (beep sound) | ||
| BEEP” | ON/OFF. |
|
|
|
| “ON”/ “OFF” |
|
|
| “Chinese” * | When this is set to ON, the following character | ||
|
| strings are displayed in Chinese: | ||
|
| Folder name/ File name/ Song title/ Artist | ||
|
| name/ Album name/ | ||
|
| (optional accessory) |
|
|
|
| “ON”/ “OFF” |
|
|
| “Built in AUX”/ | When this is set to ON, AUX source can be | ||
| selected. |
|
| |
|
| “ON”: Allows AUX source to be selected. Use | ||
|
| this setting when the | ||
|
| is connected to the external equipment all | ||
|
| the time. |
|
|
|
| “OFF”: Disable AUX source selection. Use this | ||
|
| setting when the | ||
|
| not used. |
|
|
| “Forced | Sets the CD read mode. |
|
|
| “CD READ” | “Settings 1”/”1”: Automatically distinguishes | ||
|
| between Audio file disc and music CD when | ||
|
| playing disc. |
|
|
|
| “Settings 2”/”2”: Forces playing as music CD. | ||
| “Built in AMP”* | Selecting “OFF” turns off the | ||
|
| Turning off the | ||
|
| quality of the sound from Preout. | ||
|
| “ON”/ “OFF” |
|
|
| “Switchable | Switches the preout between rear output and | ||
| Preout”/ “SWITCH | subwoofer output. |
|
|
| PREOUT” | “Rear”/ “REAR”: Rear output | ||
|
| “SubWoofer”/ | ||
| “SP SELECT”** | |||
|
| optimal when setting the speaker type as | ||
|
| follows; |
|
|
|
| “SP OFF”: Off |
|
|
|
| “SP 5/4”: For 5 & 4 in. speaker | ||
|
| “SP 6* 9/6”: For 6 & 6x9 in. speaker | ||
|
| “SP OEM”: For the OEM speaker | ||
| “System F/W | Upgrades the firmware. |
|
|
| Update”/ “F/W | Selecting “YES” and then pressing [VOL] knob | ||
| UP” | starts upgrading the firmware. | ||
|
| For how to update the firmware, access our web | ||
|
| site. http://www.kenwood.com/cs/ce/ | ||
|
| ( |
| : Factory setting) |
*Function of
**Function of
5Make a setting
Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.
6Exit Function setting mode
Press the [ ] button for at least 1 second.