Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

Display

Overview

 

 

“2Zone Rear Volume”*

Adjust the volume of Rear channel.

 

 

“0” — “35”

 

 

“Detailed Setup”

 

 

 

 

“2Zone”

Sets the Dual Zone System.

 

 

“ON”/ “OFF

 

 

 

“2Zone Select”*

Specifies the destination of sub source sound

 

 

when the Dual Zone function is turned on.

 

 

Rear”/ “Front”

 

 

* The Dual Zone System is set to “ON”.

 

 

 

 

(

 

: Factory setting)

1Select the source Press the [SRC] button.

Select a source other than “STDBY”.

2Enter Function setting mode Press the [VOL] knob.

3Turn the [VOL] knob and press it when the desired item is displayed.

Select “Audio Control” > “Detailed Setup”.

4Select the item you want to set

Turn the [VOL] knob and press it when the desired item is displayed.

5Exit Function setting mode

Press the [   ] button for at least 1 second.

Select Main source by [SRC] button.

Adjust the volume of Front channel by [VOL] knob.

The Audio Control has no effect on sub source.

There are following limitations when Dual Zone System is enabled.

-There is no output from the subwoofer.

-“Fader”,“SubWoofer Level”of <Audio Control> (page 32) and DSP function are not available.

The Bluetooth audio source can be set exclusively to the front speaker. Set “2Zone Select” to “Rear”.

English 35