Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood KDC-8080R, KDC-PS9080R Reset button, Mask key

1 52

Download 52 pages, 633.33 Kb

Safety precautions

English

NOTE

•If you experience problems during installation, consult your Kenwood dealer.

•If the unit fails to operate properly, press the RESET button. When the faceplate controls are not visible, press the left part at the upper side of the faceplate (as illustrated on p.9) for as many times as you have preset to make the faceplate controls appear. The unit returns to factory settings when the RESET button is pressed. After you press the reset button, the Mask Key will be needed to restart the unit. If the unit still fails to operate properly after the RESET button has been pressed, contact your local KENWOOD dealer for assistance.

•Press the reset button if the CD auto changer is first controlled and operates incorrectly. The original operating condition will return.

•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.

•The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected.

Mask key

If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.

When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal.

If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off.

2CAUTION

Do not loose the "Mask Key".

If power is disconnected from the unit, correct operation can only be restored by the "Mask Key's" signal.

The "Mask Key" will also be required for service repair.

NOTE

If you send products in for repair that include a mask key, make sure to present the unit together with the mask key.

Reset button

— 4 —

Contents

B64-1605-00(EN) English Before use General features Tuner features RDS features 2WARNING2CAUTION IMPORTANT INFORMATION You cannot connect the unit directly to the To prevent injury and/or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit Reset button Cleaning the Faceplate Terminals Cleaning the Unit Cleaning the CD Slot The marking of products using lasers (Except for some areas) Lens Fogging Handling CDs Cleaning CDs Do Not Load CD Accessories in Slot Removing the CD Checking New CDs for Burrs Power Power ON/OFF: Switching Modes Switching Modes: Selecting the standby mode: Volume Increasing Volume: Forced Closing This function prevents tampering with the unit your car is being serviced etc Switching Display Selecting the Display Mode: Changing the Display: Example: Tuner mode CLK button TEL Mute When the telephone rings: Restoring Original Unit Source During Phone Call: Press the SRC button Turning TEL Mute Function Off After Phone Call: Hang the phone up Removing the Faceplate Removing the faceplate: Reattaching the Faceplate: Audio Control Setting Page “LPF NFpre” : Adjust the frequency of the Low-passfilter for Non-Fadingoutput Setting values: 50 Hz / 80 Hz / 120 Hz / Through Setting values: Normal (0°) / Reverse (180°) Setting values: - 8 – Storing your sound settings: Faceplate Angle Adjustment Adjusting faceplate angle: Non-FadingOutput Turning non-fadingoutput On/Off : Tuning Station Preset Memory Recalling a Preset Station: Switching Display for Tuner Displaying Frequencies: Kenwood intelligent Twin IF (K2I) RDS (Radio Data System) Enhanced Other Network Alarm Programme Type (PTY) Function 2Select the type of programme to be received 3Seeking the selected programme type Cancelling Programme Type Function During Its Operation: Traffic Information Function Turning TI function On/Off: Switching to a Different Traffic Information Station: Presetting Volume for Traffic Information/News Radio Text Scroll Page "N"-operation: "O"-operation: Playing CDs Playing CDs: Playing CDs Already Inserted: Pausing and Restarting Disc Play: Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Reversing Disc Play: Track Search Switching Display for Discs Switching Display for Discs: Track / Disc Repeat Turning Repeat Play Function On/Off: Presetting Disc Names (DNPS) Track Scan Starting the Track Scan: Stopping to Listen to the Track Being Scanned: Disc Scan Starting the disc scan: Stopping to Listen to the Disc Being Scanned: Magazine Random Play Menu System Enter the menu mode Selecting function to set 3 Changing setting for currently displayed function 4Ending the menu mode Press the MENU button Touch Sensor Tone Display and setting: 3Selecting the item (day, month, or year) to adjust Press the 4 or ¢ button 4Adjusting the date Manual Time Adjustment Automatic Time Adjustment Mask Key When using the unit for the first time: If you press the RESET button or remove the battery: Selectable Illumination Brightness level adjustment Dimmer Switching Graphic Display Black Mask Time setting for removing the faceplate Switching preout Dual Zone System External Amp Control Manual Open Button Setting dB (Sound Coordinate system) News Bulletin Function Local Seek Function Selecting Tuning Mode Auto Memory Entry Cancelling Auto Memory Entry During Its Operation: AF (Alternative Frequency) Function RDS Restricting RDS Region (Region Restrict Function) Auto TP Seek Function Monaural Reception ATT FM/DISC + SRC AM/DISC – Loading and Replacing the Lithium Battery: Basic operations Tuner features CD/External disc control features Accessories External view ......... Number of items Installation Procedure Connecting Cables to Terminals Connector Function Guide Cable Colour Functions External Power Connecting the ISO Connector (see p.42) (Default setting) The Unit Vehicle Ignition cable (Red) Removing the Unit ■ Removing the hard rubber frame ■ Removing the Unit Locking the faceplate to the unit ■Locking the faceplate to the unit Attaching Steering Remote Control Mounting Example Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION CD/External disc control mode If the following situations, consult your nearest service centre: Even though no device Page Specifications Specifications subject to change without notice. FM tuner section FM tuner section Frequency range (50 kHz Space) 87,5 MHz – 108,0 MHz