PROBLEM | POSSIBLE CAUSE | SOLUTION | |||
|
|
|
|
| |
A CD ejects as soon as it is | The CD is |
|
| ||
loaded. |
|
|
|
| |
| The CD is quite dirty. | Clean the CD, referring to the section on "Cleaning CDs" | |||
|
| ||||
|
|
| (see page 5). | ||
|
|
| |||
The disc control mode cannot | No cable has been connected to the disc changer input | Connect the cable to the disc changer input terminal on | |||
be selected. | terminal on the unit. | the unit. | |||
|
|
|
|
| |
The specified disc does not | The specified CD is very dirty. | Clean the CD. | |||
play, but another one plays |
|
|
| ||
The CD is | Load the CD with the labelled side up. | ||||
instead. | |||||
|
|
|
|
| |
|
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the | ||
|
|
| specified disc. | ||
|
|
|
|
| |
|
| The disc is severely scratched. | Try another disc instead. | ||
|
|
|
|
| |
The sound skips. | Something is touching the disc changer. | Remove whatever is touching it. | |||
|
|
|
|
| |
|
| The CD is scratched or dirty. | If skipping happens at the same place when the car is | ||
|
|
| stopped, something is wrong with the CD. Clean the CD. | ||
|
|
|
| ||
The display shows that the | The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see page 4). | |||
changer is being played, but no |
|
|
| ||
sound can be heard. |
|
|
| ||
|
|
|
| ||
The specified track does not | Random play or magazine random play has been | Turn off the random play or magazine random play | |||
play. | selected. | function. | |||
|
|
|
| ||
Track repeat, disc repeat, track | The setting is not cancelled. | The settings for these functions remain on until the | |||
scan, disc scan, random play, |
| setting to off or the disc ejected, even if the power is | |||
and magazine random play |
| turned off or the source changed. | |||
start by themselves. |
|
|
| ||
|
|
|
|
|
•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
•Even though no device
— 47 —