Kenwood KDC-8080R, KDC-PS9080R A–4, A–5, A–6, A–7, Red, A–8, B–1, B–2, B–3, B–4, B–5, B–6, B–7, B–8, Gray, Black, White, Green, Yellow, Dimmer, Purple, Battery, Speaker, Functions

English

Connecting Cables to Terminals

Antenna Conversion Adaptor (ISO–JASO) (Accessory3)

Antenna Cord (ISO)

Non-fading right output (Red) (KDC-PS9080R only)

Connector Function Guide

FM/AM

Non-fading left output (White) (KDC-PS9080R only)

Pin Numbers for

Cable Colour

Functions

antenna input

FAD-NON

Rear right output (Red) /

ISO Connectors

Non-fading right output (Red) (KDC-8080R only)

External Power

REAR

Rear left output (White) /

Connector

Non-fading left output (White) (KDC-8080R only)

A–4

Yellow

Battery

Front right output (Red)

FRONT

A–5

Blue/White

Power Control

Front left output (White)

A–6

Orange/White

Dimmer

A–7

Red

Ignition (ACC)

KENWOOD disc changer / DAB control input /

A–8

Black

Earth (Ground)

Display Data Output Jack

Outputs data representing the unit's current state, causing it

Connection

to appear in the external display.

Speaker

Fuse(10A)

To connect to this jack, a converting adapter (optional) is

Connector

Rear Right (+)

necessary.

B–1

Purple

Wiring harness

NOTE

B–2

Purple/Black

Rear Right (–)

(Accessory1)

To connect the Disc changer or DAB unit, consult each

B–3

Gray

Front Right (+)

manual.

B–4

Gray/Black

Front Right (–)

DC/DC converter box (Wrap the cushion (Accessory0)

B–5

White

Front Left (+)

around this box.)

B–6

White/Black

Front Left (–)

2CAUTION

B–7

Green

Rear Left (+)

External amplifier

Separate this box from the unit and antenna cords. If they

B–8

Green/Black

Rear Left (–)

are too close, it may cause the reception to get noise.

control cable

(Pink / Black)

EXT.CONT

To "EXT.AMP.CONT." terminal of the

Battery cable (Yellow)

amplifier having the external amp control

TEL mute cable (Brown)

function.

Ignition cable (Red)

Connect to the terminal that is grounded

TEL MUTE

when either the telephone rings or during

conversation.

NOTE

A–7 Pin (Red)

Power control/ Motor antenna

To connect the KENWOOD navigation

system, consult your navigation manual.

control cable (Blue/White)

Connect either to the power control

A–4 Pin (Yellow)

P.CONT.OUT

terminal when using the optional power

8

6

4

2

amplifier, or to the antenna control terminal

Connector A

NOTE

in the vehicle.

7

5

3

1

If no connections are

Connector B

8

6

4

2

made, do not let the cable

7

5

3

1

come out from the tab.

— 42 —