Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood KDC-8080R, KDC-PS9080R The, A–7, A–4, The, Unit, Unit, Unit, Vehicle, Vehicle, Pin (Red), Installtion, A–7Pin (Red), Pin (Yellow), ■Installation, A–4Pin (Yellow), A–4Pin (Yellow)

1 52

Download 52 pages, 633.33 Kb

2WARNING

Connecting the ISO Connector (see p.42)

The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.

The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.

1(Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply.

Unit	Vehicle
Ignition cable (Red)	A–7 Pin (Red)
Battery cable (Yellow)	A–4 Pin (Yellow)

2The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

Unit

Vehicle

Installtion■Installation

Firewall or metal support

Screw (M4X8) (commercially available)

Self-tapping

	screw		Metal mounting
	screw		strap
	(commercially		strap
	(commercially		(commercially
	available)		(commercially
	available)		available)
			available)

	NOTE

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

Ignition cable (Red)	A–7	Pin (Red)
Battery cable (Yellow)	A–4	Pin (Yellow)

3The A-7 pin (red) of the vehicle's ISO connector is not connected to anything, whilst the A-4 pin (yellow) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).

Unit	Vehicle
Ignition cable (Red)	Connect to a power source that can be
	turned on and off with the ignition key.
Battery cable (Yellow)	A–4 Pin (Yellow)

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

2CAUTION

To attach this unit, make sure the front of the control panel faces you and fit it into the mounting sleeve by pressing the four corners of the hard rubber frame at the same time.

Do not apply strong pressure to other sections than the corners; otherwise troubles such as the impossibility of opening or closing the panel may result.

— 43 —

Contents

B64-1605-00(EN) English Before use General features Tuner features RDS features 2WARNING2CAUTION IMPORTANT INFORMATION You cannot connect the unit directly to the To prevent injury and/or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit Reset button Cleaning the Faceplate Terminals Cleaning the Unit Cleaning the CD Slot The marking of products using lasers (Except for some areas) Lens Fogging Handling CDs Cleaning CDs Do Not Load CD Accessories in Slot Removing the CD Checking New CDs for Burrs Power Power ON/OFF: Switching Modes Switching Modes: Selecting the standby mode: Volume Increasing Volume: Forced Closing This function prevents tampering with the unit your car is being serviced etc Switching Display Selecting the Display Mode: Changing the Display: Example: Tuner mode CLK button TEL Mute When the telephone rings: Restoring Original Unit Source During Phone Call: Press the SRC button Turning TEL Mute Function Off After Phone Call: Hang the phone up Removing the Faceplate Removing the faceplate: Reattaching the Faceplate: Audio Control Setting Page “LPF NFpre” : Adjust the frequency of the Low-passfilter for Non-Fadingoutput Setting values: 50 Hz / 80 Hz / 120 Hz / Through Setting values: Normal (0°) / Reverse (180°) Setting values: - 8 – Storing your sound settings: Faceplate Angle Adjustment Adjusting faceplate angle: Non-FadingOutput Turning non-fadingoutput On/Off : Tuning Station Preset Memory Recalling a Preset Station: Switching Display for Tuner Displaying Frequencies: Kenwood intelligent Twin IF (K2I) RDS (Radio Data System) Enhanced Other Network Alarm Programme Type (PTY) Function 2Select the type of programme to be received 3Seeking the selected programme type Cancelling Programme Type Function During Its Operation: Traffic Information Function Turning TI function On/Off: Switching to a Different Traffic Information Station: Presetting Volume for Traffic Information/News Radio Text Scroll Page "N"-operation: "O"-operation: Playing CDs Playing CDs: Playing CDs Already Inserted: Pausing and Restarting Disc Play: Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Reversing Disc Play: Track Search Switching Display for Discs Switching Display for Discs: Track / Disc Repeat Turning Repeat Play Function On/Off: Presetting Disc Names (DNPS) Track Scan Starting the Track Scan: Stopping to Listen to the Track Being Scanned: Disc Scan Starting the disc scan: Stopping to Listen to the Disc Being Scanned: Magazine Random Play Menu System Enter the menu mode Selecting function to set 3 Changing setting for currently displayed function 4Ending the menu mode Press the MENU button Touch Sensor Tone Display and setting: 3Selecting the item (day, month, or year) to adjust Press the 4 or ¢ button 4Adjusting the date Manual Time Adjustment Automatic Time Adjustment Mask Key When using the unit for the first time: If you press the RESET button or remove the battery: Selectable Illumination Brightness level adjustment Dimmer Switching Graphic Display Black Mask Time setting for removing the faceplate Switching preout Dual Zone System External Amp Control Manual Open Button Setting dB (Sound Coordinate system) News Bulletin Function Local Seek Function Selecting Tuning Mode Auto Memory Entry Cancelling Auto Memory Entry During Its Operation: AF (Alternative Frequency) Function RDS Restricting RDS Region (Region Restrict Function) Auto TP Seek Function Monaural Reception ATT FM/DISC + SRC AM/DISC – Loading and Replacing the Lithium Battery: Basic operations Tuner features CD/External disc control features Accessories External view ......... Number of items Installation Procedure Connecting Cables to Terminals Connector Function Guide Cable Colour Functions External Power Connecting the ISO Connector (see p.42) (Default setting) The Unit Vehicle Ignition cable (Red) Removing the Unit ■ Removing the hard rubber frame ■ Removing the Unit Locking the faceplate to the unit ■Locking the faceplate to the unit Attaching Steering Remote Control Mounting Example Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION CD/External disc control mode If the following situations, consult your nearest service centre: Even though no device Page Specifications Specifications subject to change without notice. FM tuner section FM tuner section Frequency range (50 kHz Space) 87,5 MHz – 108,0 MHz