Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
Speaker Setting
3rd section
[2] button
Adjustment Item Display Range
Volume offset "Volume Offset" –8 — ±0
[3] button
Adjustment Item Display Range
Non-Fading level "NF Level" –15 — +15
Non-Fading Phase "NF Phase" Normal (0°)/Reverse (180°)
Volume offset: Each source's volume can be set as a difference
from the basic volume.
•TruBass: Assisting the playback for the super bass sound.
•FOCUS: Adjusts the sound image by changing the vertical position
of the speakers virtually.
•SRS: Making a natural 3D sound field.
•SRS cannot be set in tuner source.
2nd section
[2] button
Adjustment Item Display Range
Front High Pass Filter "HPF Front" Through/40/60/80/100/
120/150/180/220 Hz
Rear High Pass Filter "HPF Rear" Through/40/60/80/100/
120/150/180/220 Hz
[3] button
Adjustment Item Display Range
Non-Fading "LPF NF" 50/80/120/Through Hz
Low Pass Filter
[4] button
Adjustment Item Display Range
Loudness "Loudness" ON/OFF
[5] button
Adjustment Item Display Range
WOW "SRS WOW" Low/High/OFF
TruBass "SRS TruBass" ON/OFF
FOCUS "FOCUS" Low/High/OFF
SRS "SRS" ON/OFF
•Loudness: Compensating for low and high tones during low
volume.
•WOW: TruBass, FOCUS and SRS are all set to values shown
below.
WOW TruBass FOCUS SRS
High ON High ON
Low ON Low ON
OFF OFF OFF OFF
General features
— 12 —
English
KDC-9023R_U.S_r4.pg 02.12.9 6:02 PM Page 12