Switching the text display.
1Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2Enter display control mode
Press the [3] ("DISP") button.
3Enter text select mode
Press the [3] ("TEXT") button.
4Select the text in the upper text display part
Press the [FM] or [AM] button.
Select the text in the lower text display part
Press the [4] or [¢] button.
Refer to the table described later for setting items.
5Exit Display Control mode
Press the [RTN] button.
•The setting of this function is available while "Display Type A" is
selected for the Display mode.
•Upper text display part cannot display the same information as
Lower text display part.
•The Album name cannot be displayed during WMA play.
Text Display Switching
— 15 —
Select a wallpaper to display when Display Type is set to
"Display Type B" or "Display Type C".
1Select the wallpaper display
Refer to <Right Side Graphic Display Switching> (page 14).
2Select the wallpaper
Display the wallpapers one after another and select one
1 Turn the wallpaper scan ON
Press the [38] button.
Each time the button is pressed the Wallpaper scan is turned
ON and OFF.
When it's ON, "SCAN" is displayed.
When it’s ON, each wallpaper is displayed every several
seconds.
2 At the wallpaper you want to display
Press the [38] button.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the [38] button.
Each time the button is pressed the Wallpaper scan is turned
ON and OFF.
2 Select the wallpaper.
Press the [4] or [¢]button.
Each time the button is pressed the wallpaper changes.
3Exit Display Control mode
Press the [RTN] button.
Wallpaper selecting
KDC-9023R_U.S_r5.pg 02.12.19 11:39 AM Page 15