Setting the angle or back-forward position of the control panel.
1Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "PNL" is displayed above the [4]
button.
2Enter Panel Position Setting mode
Press the [4] ("PNL") button.
3Select the item for adjustment
Press the desired [2] —[5] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item Button Display
The panel tilts upwards [2] "ANG–"
The panel tilts downwards [3] "ANG+"
The panel slides backward [4] "SLD–"
The panel slides forward [5] "SLD+"
4Exit Panel Position Setting mode
Press the [RTN] button.
The control panel may be interfered with the shift lever or another
part depending on the angles of the control panel.
Set the angle to avoid any interference.
No sound is produced while the panel is operating.
Panel Position Setting
— 19 —
KDC-9023R_U.S_r6.pg 03.1.6 10:13 AM Page 19