Other Functions

Security Code

When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.

⁄

•When you activate the Security Code function, it cannot be released.

Note, your Security Code is the 4 digit number entered in your “Car Audio Passport” in this package.

1Select Security Code item during Menu mode (In Standby mode)

“Security Set” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Security Code mode

Press the Control knob for at least 1 second. When “Enter” is displayed, “SECURITY SET” is also displayed.

3Enter Security Code

Operation type

 

Operation

Select the digits to enter

 

Push the Control knob towards right

 

 

or left.

Select the Security Code

 

Turn the Control knob or push it

numbers

 

towards up or down.

4Confirm the Security Code

Press the Control knob for at least 3 seconds. When “Re-Enter” is displayed, “SECURITY SET” is also displayed.

5Do the step 3 through 4 operation, and reenter the Security Code.

“Approved” is displayed.

The Security Code function activates.

⁄

•If you enter a Code different from your Security Code, you have to start over from step 3.

6Exit Security Code mode Press the [FNC] button.
Entering Security Code

The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

1Turn the power ON.2Do the step 3 through 4 operation, and reenter the security code.

“Approved” is displayed. Now, you can use the unit.

⁄

•If an incorrect code is entered, “Waiting” is displayed, and the input prohibition periods shown in the table below is generated.

After the input prohibition time lapses, “SECURITY” is displayed, and you can reenter the code.

Number of times the

 

Input prohibited time

incorrect code was input

 

 

1

 

—

2

 

5 minutes

3

 

1 hour

4

 

24 hours

English 17