Troubleshooting Guide

Bluetooth audio source

?The Bluetooth audio player cannot be registered (pairing).

The PIN code is fixed.

When a PIN code is specified in the Instruction Manual for Bluetooth Audio Player, register it with reference to <Registering PIN Code> (page 24) to register the Bluetooth audio player. If no PIN code is specified in the Instruction Manual, try “0000”.

?The sound from the Bluetooth audio player is discontinuous.

The distance between this unit and audio player is too far.

Move the audio player nearer to this unit.

Another Bluetooth device is affecting the Bluetooth communication.

Turn off another Bluetooth device.

Move another Bluetooth device away from this unit.

Another Bluetooth device or profile is used for communication.

The downloading of the Phone book or the SMS disconnects the sound.

The messages shown below display your systems condition.

TOC Error:

• No disc has been loaded in the disc

 

magazine.

 

• The CD is quite dirty. The CD is upside-

 

down. The CD is scratched a lot.

Error 05:

The disc is unreadable.

Error 77:

The unit is malfunctioning for some reason.

 

Press the reset button on the unit. If the

 

“Error 77” code does not disappear, consult

 

your nearest service center.

Mecha Error:

Something is wrong with the disc magazine.

 

Or the unit is malfunctioning for some reason.

 

Check the disc magazine. And then press

 

the reset button on the unit. If the “Mecha

 

Error” code does not disappear, consult

 

your nearest service center.

IN (Blink):

The CD player section is not operating

 

properly.

 

Reinsert the CD. If the CD cannot be

 

ejected or the display continues to flash

 

even when the CD has been properly

 

reinserted, please switch off the power

 

and consult your nearest service center.

Protect:

The speaker wire has a short-circuit or

 

touches the chassis of the vehicle, and then

 

the protection function is activated.

 

Wire or insulate the speaker cable properly

 

and press the reset button. If the “Protect”

 

code does not disappear, consult your

 

nearest service center.

Unsupported File:

An Audio file is played with a format that this unit can’t support.

Copy Protection:

A copy-protected file is played.

Read Error:

The file system of the connected USB device

 

is broken.

 

Copy the files and folders for the USB

 

device again. If the error message is still

 

displayed, initialize the USB device or use

 

other USB devices.

No Device:

The USB device is selected as a source

 

although no USB device is connected.

 

Change the source to any source other

 

than USB. Connect an USB device, and

 

change the source to USB again.

N/A Device:

An unsupported USB device is connected.

No Music Data/ Error 15:

The connected USB device contains no playable audio file.

Media was played that does not have data recorded that the unit can play.

38 KDC-BT7539U