Bluetooth Setup

Selecting the Bluetooth device You Wish to Connect

When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.

1Select Bluetooth device selection item during Menu modeCell-phone

(In Standby mode)

“Phone Selection” is displayed.

Audio player

“Audio Selection” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Bluetooth device selection mode Press the Control knob for at least 1 second. '(name)' is displayed.

3Select the Bluetooth device

Turn the Control knob or push it towards up or down.

4Set up the Bluetooth device

Push the Control knob towards right or left. '✱(name)' or '-(name)' is displayed.

"✱": The selected Bluetooth device is busy.

"-": The selected Bluetooth device is on standby.

" " (blank): The Bluetooth device is deselected.

5Exit the Bluetooth device selection mode Press the [FNC] button.

⁄

•If a cell-phone is already selected, deselect it, and then select a different one.

•If you cannot select a device using the audio player, connect the device with the audio player.

Deleting a Registered Bluetooth device

You can delete a registered Bluetooth device.

1Select Bluetooth device deletion item during Menu mode (In Standby mode)

“Device Delete” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Bluetooth device deletion mode Press the Control knob for at least 1 second. '(name)' is displayed.

3Select the Bluetooth device

Turn the Control knob or push it towards up or down.

4Delete the selected Bluetooth device Press the Control knob.Turn the Control knob to select “YES”, and then press the Control knob.5Exit the Bluetooth device deletion mode Press the [FNC] button.

⁄

•When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1Select Bluetooth Firmware update item during Menu mode (In Standby mode)

“BT F/W Update” is displayed.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Bluetooth Firmware update mode Press the Control knob for at least 1 second. The firmware version appears.

3Exit Bluetooth Firmware update mode Press the [FNC] button.

⁄

•For how to update the firmware, access our website. http://www.kenwood.com/bt/information/

24 KDC-BT7539U